User Manual-Reference Guide

31
Connecting to Your Computer
By using a USB cable to connect the R-07 to your computer, you
can transfer les from the R-07’s microSD card into your computer
and use them in your music software. You can also transfer les
from your computer to the R-07 and play them back on the R-07.
For details, refer to “Types of Files that Can be Played” (p. 25).
Transferring Files with a Computer
(Mass Storage)
Connecting the R-07 to Your Computer
1. Start up your computer.
2. Make sure that a microSD card is inserted in the
R-07’s microSD card slot.
For details, refer to “Inserting a microSD Card” (p. 8).
3. Switch on the R-07’s power (p. 6).
4. Access the main screen.
5. Use the commercially available USB cable to
connect the R-07 to your computer.
USB micro-B type
NOTE
5 When connecting the USB cable to your computer, grasp
the base of the connector, and avoid touching the metallic
portion of the plug.
5 If you connect the R-07 to your computer with no microSD
card inserted, the R-07’s display will indicate “No Card.”
5 The R-07 will not be recognized if you connect it to your
computer when the “Menu” screen is shown, or during
playback or recording. Disconnect the USB cable that’s
between the R-07 and your computer, and perform the
procedure again from step 3.
5 The R-07’s various functions are unavailable in the “Now
connecting” screen when connected to a computer.
Operations of the buttons or switches will be ignored.
5 If your computer displays the message “Insert a disk with
this type of le ...,” click [Cancel].
6. Use [ ]/[ ] to select “Storage,” and press [ ].
After a while, the computer will detect the R-07, and the R-07’s
display will show the “Now connecting” screen.
Your computer will recognize the R-07’s microSD card in the
following way.
Windows
Appears in Computer or Explorer under a name
such as removable disk.
OS X/macOS
Appears on the desktop with a name such as NO
NAME.
To copy les, use your computer to drag and drop them.
Disconnecting from Your Computer
Here’s how to disconnect the R-07 from your computer. You must
use the following procedure to end the connection before you
disconnect the USB cable.
NOTE
Do not switch o the R-07’s power, disconnect the USB
cable, or remove the microSD card while the R-07 is
connected to your computer.
Windows 7/8/10
1. In the Windows task tray, click icon, and then
icon.
2. Click on the message “Eject WAV/MP3 recorder
R-07” appears above the task tray.
3. When you see the message “Safe to Remove the
Hardware,” you can disconnect the USB cable that’s
between the R-07 and your computer.
OS X/macOS
1. Drag “NO NAME” into the trash in the dock.
* This screen shot was taken from macOS Sierra.
* The display might be dierent depending on your system.
When you drag to the location of the trash at the right edge of
the dock, the trash can will change to
, allowing you to stop the
connection.
2. Stop the connection.
When the “NO NAME” or “Unnamed” icon disappears from the
desktop, you can disconnect the USB cable that’s between the R-07
and your computer. Alternatively, you can switch o the R-07’s
power.