User Manual-Reference Guide

6
Getting Ready
Installing the Batteries
Types of batteries that can be used
5 Alkaline battery (AA, LR6)
5 Rechargeable Ni-MH battery (AA, HR6)
NOTE
The R-07 itself is not able to recharge rechargeable
Ni-MH batteries. You’ll need to use a battery charger
designed for rechargeable Ni-MH batteries.
1. Make sure that the power is o.
If the power is on, turn it o. Slide the R-07’s [POWER] switch
toward POWER to turn the power on/o.
2. Open the cover of the battery compartment
located on the bottom of the unit.
Turn the R-07 over, then slide the cover downward while pressing
the area circled in the illustration.
* When turning the unit over, be careful so as to protect the
buttons and knobs from damage. Also, handle the unit
carefully; do not drop it.
3. Install the batteries.
Install two AA batteries in the compartment, making sure that the
polarity (+/– orientation) is correct.
+
+
–
–
4. Close the cover of the battery compartment.
Supplying Power from the USB Port
1. Connect a commercially-available USB AC adaptor
and commercially-available USB cable to the R-07.
USB micro-B type
To outlet
If batteries are installed, the power supplied from the USB port is
used, and the batteries are not depleted.
Turning the Power On/O
1. Slide the [POWER] switch toward POWER for several
seconds; the power will turn on.
2. If the Select USB Mode screen appears, use
[ ]/[ ] to select “Power Supply,” and press [ ].
A screen like the following will appear in the display. We’ll call this
the “main screen.”
3. To turn the power o, slide the [POWER] switch
once again toward POWER for several seconds.
Note when using the R-07 on batteries
5 If you handle batteries improperly, you risk explosion and uid
leakage. Make sure that you carefully observe all of the items
related to batteries that are listed in “USING THE UNIT SAFELY”
and “IMPORTANT NOTES” (leaet “USING THE UNIT SAFELY).
5 Do not mix fresh batteries with used batteries, and do not mix
batteries of dierent types.
5 If you won’t be using the R-07 for an extended period of time,
we recommend that you remove the batteries to prevent them
from leaking electrolyte.
5 If electrolyte should leak from the batteries, use a soft cloth
to wipe the battery compartment clean, and then install new
batteries. Electrolyte that contacts your skin might cause
irritation. Electrolyte that enters your eyes is dangerous; if this
occurs, immediately ush your eyes thoroughly with water.
5 Do not carry or store batteries together with metallic objects
such as pens, necklaces, or hairpins.
Power conservation function
The power to this unit will be turned o automatically after a
predetermined amount of time has passed since it was last used
for playing music, or its buttons or controls were operated (Auto
O function).
If you do not want the power to be turned o automatically,
disengage the Auto O function. For details, refer to the “Auto O”
(p. 40).
5 To restore power, turn the power on again.