Technical data

Manual
Double Sheet Detector R1000 series E20
B0046991 / Rev. 1.6
Start-up
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
103
7.4 General information regarding the configuration
Note The correct configuration depends on the communication with the PLC,
on the measurement task and the connected components.
The following rules apply to the operation in the configuration mode:
• The configuration mode is activated (while in measurement mode) by pressing the MENU
key.
• The configuration mode is terminated or cancelled by pressing the MENU key.
• The selected / set parameters can be changed when the items are blinking in the display.
• The selected / set parameters are activated by pressing the ENTER key.
Pos: 57 /Doppel blech/Geräte/E2 0/7 Inbetriebna hme/Ändern, Anlegen, Kontr ollieren der Ko nfiguration @ 1\mod_1192448 716671_501.d oc @ 4880 @ 2 @ 1
7.5 Changing, setting-up or checking the configuration
In order to select, set-up or check the system / program parameters, press the MENU key.
The following menu is shown.
Fig. 40: Indication after calling-up the menu
This menu option permits either reviewing or changing the configuration.
Configuration review: The system / program parameters cannot be changed.
The measurement mode is not interrupted.
Configuration change: All system / program parameters can be changed after entering the
password.
The following menu option is shown.
Fig. 41: Password request
Each blinking digit can be changed with the arrow keys and confirmed with ENTER. After having
entered the correct password, the following menu appears for the adjustment of the configuration
mode.
configuration
review
password
4711