Technical data

Manual
Double Sheet Detector R1000 series E20
Start-up
B0046991 / Rev. 1.6
104
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
If the entered password is incorrect then the cursor returns to the first digit of the password and the
input must be repeated. The input of the password can be aborted by pressing the MENU button.
Note: A fault is generated if PLC commands are executed while entering the
password or changing parameters.
Fig. 42: Selecting the configuration mode
Available configuration modes:
• Configuration system parameter
• Configuration program parameter
• Data backup
System parameters are general adjustments (e.g. language).
Program parameters are application specific adjustments (e.g. input of nominal sheet thickness).
Note After exiting the configuration mode the password remains active for five
minutes. Thus other configuration adjustments can be made, without re-
entering the password. If no key is pressed (while in the menu level), then
the program changes to the measurement mode
Pos: 58 /Doppel blech/Geräte/E2 0/7 Inbetriebna hme/Param eter (Progra mm-) @ 1\mod_ 1192448721875 _501.doc @ 4 922 @ 233 @ 1
configuration
program param.