Technical data

Manual
Double Sheet Detector R1000 series E20
Technical data
B0046991 / Rev. 1.6
12
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
Attention In case of inductive load a coil protection diode should be used.
Otherwise the signal output could be destroyed by the excess voltage
generated by switching the inductive load off.
• RS232 interface
Specification:
- Baudrate: 4800 - 19200 baud
- Data Bits: 8
- Parity-Bit: None
- Stop-Bit: 1
- Hardware Handshake: None
The selection of the interface parameters with the exception of the baudrate is made via the
software and cannot be changed by user.
Pos: 10 /Doppel blech/Geräte/E2 0/2 Technisch e Daten/Varia nten des Aus wertegerätes E 20 @ 1\mod_121 6127949937_ 501.doc @ 64 89 @ 2 @ 1