Technical data

Manual
Double Sheet Detector R1000 series E20
Maintenance
B0046991 / Rev. 1.6
126
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
Pos: 73 /Doppel blech/Geräte/E2 0/10 Wartung/Da tensicheru ng @ 1\mod_ 1192448770406 _501.doc @ 49 70 @ 22 @ 1
10.4 Data back up via the serial interface
The R1000 offers the possibility of data exchange with a PC. The system and program parameter
can be stored via the serial interface. In addition, stored or modified data can be written back again
into the control unit. The data backup runs via the RS232 interface (only for C version units).
Pos: 74 /Doppel blech/RPP-S oftware/RPP-X P Software @ 1\mod_12317 72712500_501.doc @ 8124 @ 2 @ 1
10.5 Short description RPP-XP software
The RPP-XP software serves the purpose of creating a data backup onto an external PC and
rewriting it back onto a ROLAND system.
In case of a defective control unit this backup can be transferred to another control unit.
The instructions of the programs can be accessed via the help function after installation (pdf).
Hardware requirements
• C-version of a ROLAND unit series R1000, such as E10, E20, I10, UDK10, UDK20 or
Fieldbus units
• PC with Windows® 95 / 98 / 2000 / NT / XP / Vista / 7 installed and a free serial interface or
USB, set at COM1 ... COM10
• null modem cable for the serial interface, or USB-serial adapter
• Your installation directory must have write permissions for later users.
• Switch the device to backup mode (For details refer to chapter 7.8).
Pos: 75 /Doppel blech/Geräte/E2 0 Bus/10 Wartung/Ersatzteile @ 0\mod_1 173282731515_ 501.doc @ 32 94 @ 2 @ 1
10.6 Spare parts
ROLAND ELECTRONIC recommends to inventory the following spare parts (minimum):
• One sensor
• A set of cables
Whether a spare control unit should be kept in inventory has to be decided on individual basis.
Pos: 76 /Kapit elübersicht/11. Tec hnische Unterl agen @ 0\m od_11214221 02859_501.doc @ 515 @ 1 @ 1