Technical data

Manual
Double Sheet Detector R1000 series E20
System description
B0046991 / Rev. 1.6
36
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
3.5 Application samples
The following are two typical application examples for the use of the E20.
If more than one sensor is required, then the E20-4P is a good choice. Four sensors of the same
type can be connected to this control unit.
These sensors cannot be operated simultaneously, but only sequentially. The switching
(sequencing) can be made as follows:
a) by program switching
b) by external sensor selection A/B
c) with the so-called sequencer mode