Technical data

Manual
Double Sheet Detector R1000 series E20
System description
B0046991 / Rev. 1.6
38
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
Method b)
Advantageous when measuring the same sheet thickness with each sensor. Each measurement
sensor is addressed via the inputs A/B of the control unit. In addition, the result of each
measurement is available as output.
Note Advantage: Substantial time saving compared to program switching.
0.9 mm
(.035 in.)
0.9 mm
(.035 in.)
0.9 mm
(.035 in.)
Start
1 2 3 4
Program Thickness Sensor
1 0.9 mm - *
* If sensor selection A/B configured, the
sensor number cannot selected in the
program.
PLC
1. Select program 1
2. Measuring program 1
3. Analysis result of program 1
4. Select program 2
5. Measuring program 2
6. Analysis result of program 2
7. Select program 3
8. Measuring program 3
9. Analysis result of program 3
10. Select program 4
11. Measuring program 4
12. Analysis result of program 4
Note Sensor selection via "external (inputs A and B)" must be selected in the
system configuration.