Technical data

Manual
Double Sheet Detector R1000 series E20
Electrical installation
B0046991 / Rev. 1.6
64
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
5.2.2 Allocation of connectors at the E20-4P
RS232
Power
PG9
SPS / PLC
PG16
Sensor 1
PG11 EMV
Sensor 2
PG11 EMV
Sensor 3
PG11 EMV
Sensor 4
PG11 EMV
Fig. 31: Allocation of connectors at the E20-4P
Pos: 40 /Doppel blech/Geräte/E2 0/5 Elektrisc he Installation/A nschluss an B etriebserde @ 1 \mod_1192713 625531_501.d oc @ 5096 @ 2 @ 1
5.3 Connection to the grounding of the machine
The enclosure of the R1000 has an M6 threaded screw as grounding connection. This screw must
be connected to the earth ground of the equipment with a copper wire gauge of at least 1.5 mm²
cross section.
Attention The positive supply voltage +24 VDC should not be connected to
machine ground.
Pos: 41 /Doppel blech/Geräte/E2 0/5 Elektrisc he Installation/V erdrahtungspl äne und Kle mmenbelegung @ 1\mod_11924 48670343_50 1.doc @ 4820 @ 2333333 @ 1