Technical data

Manual
Double Sheet Detector R1000 series E20
B0046991 / Rev. 1.6
Electrical installation
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
67
Connection sensors 1 to 4 – E20
(Sensor 2-4 only for 4P version)
Sensor E20
Pin-Nr. Function Terminal no. Specification
P42A / P30 P75V
2 6 P-Sensor 20 black (2) [brown]
1 5 P-Sensor 21 black (1) [white]
Sensor 1
5
1)
Pin- Cable shield PG screw fitting
2 6 P-Sensor 24 black (2) [brown]
1 5 P-Sensor 25 black (1) [white]
Sensor 2
5
1)
Pin- Cable shield PG screw fitting
2 6 P-Sensor 26 black (2) [brown]
1 5 P-Sensor 27 black (1) [white]
Sensor 3
5
1)
Pin- Cable shield PG screw fitting
2 6 P-Sensor 28 black (2) [brown]
1 5 P-Sensor 29 black (1) [white]
Sensor 4
5
1)
Pin- Cable shield PG screw fitting
The terminal 19 can be used for connecting the cable shield, if this unit replaces an existing unit without EMC PG screw
fitting.
For cable FD810CY wire color: black (1) / black (2)
For cable FDCP (TP) plus wire color: white / brown
1)
The pin 5 is only present at the cable connector of the sensor cable.
The sensor has no pin 5