Technical data

Manual
Double Sheet Detector R1000 series E20
B0046991 / Rev. 1.6
Start-up
ROLAND ELECTRONIC GmbH · Otto-Maurer-Str. 17 · DE 75210 Keltern · Phone [phone] · Fax [phone]
99
7 Start-up
Pos: 53 /Doppel blech/Geräte/E2 0/7 Inbetriebna hme/Erstmalig es Einschalte n des Gerätes @ 1\mod_119 5635381765_ 501.doc @ 52 24 @ 2 @ 1
7.1 Initially applying power to the system
The R1000 E20 is designed for an operating voltage of 24 VDC (+6 V / -2 V). This voltage is to be
checked before applying power. The control unit is automatically switched on by applying the
power.
After applying power, the type of system, the version number and the bus system message are
briefly displayed. Then the system switches into that measurement menu, which was active before
the unit was switched off.
Pos: 54 /Doppel blech/Geräte/E2 0/7 Inbetriebna hme/Bedie nung @ 1\mod_1 19244871726 5_501.doc @ 4886 @ 2 @ 1