Setup guide
18
1. Installation Environment
Deciding On an Installation Site
Install the machine in a quiet and stable location oering good operating conditions. An unsuitable location
may cause accidents, res, faulty operations, or malfunctions.
WARNING
Install the machine in a location that is level, stable, and able to bear the
weight of the machine.
The total weight may reach over 200 kg (441lb.). Installation in an unsuitable
location may cause a major accident, including tip over, fall, or collapse.
WARNING
Never install the machine in an outdoor location or in a location where it
can be exposed to water or moisture.
Such circumstances may cause electric leakage and lead to electric shock,
electrocution, or re.
WARNING
Never install the machine close to any ammable objects or in a gas-lled
location.
Combustion or explosion may be a danger.
WARNING
Install in a clean, brightly lit location.
Operating the machine in a dark and clattered location may result in such ac-
cidents as your inadvertent stumbling and getting caught in the machine.
WARNING
Position the machine where you can keep the power plug within immedi-
ate reach at all times.
This is to enable quick disconnection of the power plug in the event of an emer-
gency. Install the machine next to an electrical outlet. Also, provide enough
empty space to allow immediate access to the electrical outlet.
CAUTION
Ensure adequate ventilation for the work area.
Failing to perform ventilation may result in a health hazard or danger of com-
bustion due to ink fumes.
Unsuitable Installation Sites
Locations subject to large uctuations in temperature or humidity
Locations subject to shaking or vibration
Locations where the oor is tilted, not at, or unstable
Dusty locations
Locations exposed to direct sunlight
Locations close to air-conditioning or heating equipment
Locations exposed to water or moving air
Locations exposed to considerable electrical or magnetic noise, or other forms of electromagnetic
energy