Setup guide

3. Assembling and Installing



Attach the casters onto the stand legs.

Attach the casters to the end farther away from the stand stay. The casters have no particular front and rear

orientation. Tighten the bolts securely. (8 locations in total) Loose bolts may cause the stand to wobble.

Attach the arms to the stand.

Set the stand upright and x the arms by tightening the bolts securely in the order given below. (12

locations in total for right and left)

Loose bolts may cause the stand to wobble.

Lightly tighten the bolts in the upper 4 locations. (8 locations in total for right and

left)

Lightly tighten the bolts in the 2 locations on the side. (4 locations in total for right

and left)

Fully tighten all the bolts to x the arms completely.

Stand stay

Stand leg

Bolts

Caster

Long

Short

Caster

Pipe

Hexagonal wrench

Bolts

Arm (right)

Bolts

Place the side with the

bolts to the front.

Bolts

Arm (left)

Hexagonal

wrench

Bolts