Setup guide

6. ECO-SOL MAX ink model: Installing the Ink Cartridges
39
y
Insert the retainers to the slots 3 and 4.
As paying attention to the orientation of the round hole,
insert the dummy cartridges to the slots 3 and 4.
Insert the dummy cartridge straight as far as it goes.
Remove the retainers as holding the dummy cartridges with
one hand so that they will not come off.
In the same way, insert the dummy cartridges to the slots 5 and
6 and the slots 7 and 8 by repeating the steps
to .
Press
.

How to attach the retainer
CAUTION
Push the retainer from the
top.
If you hold the lower part of the
retainer when installing, you may
get your fingers pinched due to
installing force.
Hold it with both hands and
push it down with sufcient
force along the groove.
Installation is
completed.
Align the projection of the
retainer with the groove in
the cartridge slot.
Round hole
Dummy Cartridge
Retainer