Setup guide

6. ECO-SOL MAX ink model: Installing the Ink Cartridges

Pull out the SOL INK cleaning cartridges from the slots 1

and 2.

Insert the SOL INK cleaning cartridges into the slots 1 and

Insert the cartridge straight down from the top, as far as it will go.

Following the on-screen instructions, repeat the process above

one more time.

{

Pull out the SOL INK cleaning cartridges from the slots 1 and 2.

Pull out the dummy cartridges from the slots 3 and 4.

Press

When having diculty pulling out the dummy cartridges, insert the retainer used in the

procedure

2.-

into the slots to make the task easier. For instructions for use of the

retainer, see the procedure

2.-

(When pulling out only the retainer, you can remove

it easily by tilting it slightly forward.)

Round hole

Label

surface

Label

surface