User's Manual
Table Of Contents
- Contents
- Quick Operation
- Panel Descriptions
- Before You Play
- Panel Descriptions
- Before You Play
- Playing
- Listening to Songs
- Practicing/Recording
- Connecting a Mobile Device via Bluetooth
- Connecting a Mobile Device via Bluetooth
- Reference
- Connecting the Equipment
- Playing
- Listening to Songs
- Recording Your Performance
- Creating Your Own Piano Tone (Piano Designer)
- Connecting the Piano and a Mobile Device via Bluetooth
- Convenient Functions
- Making Various Settings (Function Mode)
- Basic Settings in Function Mode
- Turning the Bluetooth Function On/Off (Bluetooth On/Off)
- Adjusting the Volume of Bluetooth Audio (Input/Bluetooth Vol.)
- Playing Different Tones with the Left and Right Hand (p. 19)
- Playing Two Tones Layered on Each Key (p. 19)
- Dividing the Keyboard for Two People (Twin Piano)
- Transposing the Pitch of the Song Playback (Song Transpose)
- Adjusting the Song (SMF) Volume (Song Volume SMF)
- Adjusting the Song (Audio) Volume (Song Volume Audio)
- Adjusting the Volume of an Audio Playback Device (Input/Bluetooth Vol.)
- Adjusting the Volume from the Computer (USB Audio Input Volume)
- Setting the Song (SMF) Playback Mode (SMF Play Mode)
- Changing How the Pedal Effects Are Applied (Damper Pedal Part)
- Changing How the Pedals Work (Center Pedal)
- Changing the Effect of the Pedal (Left Pedal)
- Preventing Doubled Notes When Connected to a Sequencer (Local Control)
- MIDI Transmit Channel Settings (MIDI Transmit Ch.)
- Changing the Language Displayed in the Screen (Language)
- Adjusting the Brightness of the Display (Display Contrast)
- Specifying the Time Until the Operating Panel Dims (Screen Saver)
- Specifying a Maximum Volume (Volume Limit)
- Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
- Making the Power Automatically Turn off After a Time (Auto Off)
- Saving Settings Automatically (Auto Memory Backup)
- Settings Saved Even If the Power Is Turned Off
- Basic Settings in Function Mode
- Troubleshooting
- Error Messages
- Tone List
- Internal Song List
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Index
18
Bottom Panel
* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any connections.
° Connecting the Equipment
USB Computer port
Connect a computer here. Use a
USB cable (commercially available)
to make this connection. This lets
the piano exchange performance
data with sequencer software
(commercially available) on your
computer, allowing you to produce
and edit music.
DC In jack
Connect the included AC
adaptor here.
Headphone Jacks
Here you can connect stereo
headphones.
Pedal jack
Connect the pedal cord.
USB Memory port
Here you can connect a USB ash drive. You can use it to record
your piano performance as audio, or use the piano to play back
music data (WAVE les, MIDI les, MP3 les) from the USB ash
drive. (p. 24, p. 21)
* Never turn o the power or disconnect a USB ash drive or the
power cord while the USB ash drive is blinking.
* Taking care that the USB ash drive is oriented correctly, rmly
insert it all the way into the port. Do not use excessive force.
Input jack
Connect an audio player or smartphone. Sound that’s
played back by the audio player can be heard from the
piano’s speakers. You can also play the piano along with the
song playback. Use a stereo mini-plug cable (commercially
available) to make this connection.
page
6
page
7
page
10
page
11