User's Manual

23
Recording Your Performance
Copying a Recorded Song
Songs that have been saved in internal memory can be copied to USB
ash drive. Alternatively, songs stored on a USB ash drive can be
copied to internal memory.
1. Press the [ ] button.
The [ ] button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access the “Copy Song” screen,
and press the [
] knob to conrm.
3. Press the [ ] knob to conrm.
The “Copy Song - Media” screen appears.
4. Turn the [ ] knob to select the copy-source and
copy-destination media, and press the [ ] knob to
conrm.
5. Turn the [ ] knob to select the song that you want
to copy.
If you decide to cancel, press the [ ] button.
6. Press the [ ] knob.
The copy is executed.
* Never turn o the power or disconnect the USB ash drive while
the screen indicates “Executing...”
7. Press the [ ] button.
You exit function mode.
Advanced Recording Methods
Recording Your Performance One Hand at a Time
By recording your left-hand performance to the Left part and your
right-hand performance to the Right part, you can record each hand
of your performance separately.
Left (or right) part
Getting ready to record
1. Select the tone that you want to play.
2. You can sound the metronome if you like.
Set the metronome’s tempo and time signature. The metronome
setting is stored in the song, and you can use the same settings
during playback.
3. Press the [7] button.
The [t] button lights, the [s] button blinks, and the piano
enters record-standby mode.
If you decide to cancel recording, press the [t] button once again.
4. Press the [ ] button and turn the [ ] knob to
select the part that you don’t want to record; then
press the [ ] knob to make it go dark.
Only the part that you’re recording will blink.
MEMO
If you don’t select a part at this time, your performance is recorded
to the following parts.
Performing with one tone “Right” part
Performing dierent tones
with the left and right
hands (Split Play)
The left-hand tone is the “Left”
part, and the right-hand tone is
the “Right” part
Performing with two tones
layered (Dual Play)
The tone 1 is the “Right” part, and
the tone 2 is the “Accomp” part
Starting/stopping recording
5. Press the [s] button.
After a one-measure count, recording starts, and the [7]
button and [s] button are both lit. The performance is saved
automatically.
MEMO
You can also start recording by playing the keyboard instead of
pressing the [s] button. In this case, a count is not sounded.
6. To stop recording, press the [s] button once
again.
Recording stops.