User's Manual

30
Convenient Functions
Initializing the Memory (Format Media)
Here’s how to erase all of the les that you saved in internal memory
or on a USB ash drive (commercially available).
NOTE
5 When you initialize, all registrations or les that you saved in
internal memory or on a USB ash drive are lost.
5 If you want settings other than the memory settings to be
returned to their factory-set state, execute a Factory Reset
(p. 30).
1. If you want to initialize a USB ash drive, connect
the USB ash drive to the USB Memory port.
2. Press the [ ] button.
The button is lit, and the piano is in function mode.
3. Turn the [ ] knob to access “Format Media” screen,
and then press the [ ] knob.
The Format Media screen appears.
If you decide to cancel, press the [ ] button.
4. Turn the [ ] knob to select the media (Internal
Memory or USB Memory) that you want to format.
5. Press the [ ] knob to conrm.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
6. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The memory is formatted.
NOTE
Never turn o the power or remove the USB ash drive while the
screen indicates “Executing...”
7. Press the [ ] button to exit function mode.
The button goes dark.
Restoring the Factory Settings
(Factory Reset)
Here’s how to restore all registrations and internally saved settings to
the factory-set condition. This function is called “Factory Reset.”
NOTE
Factory Reset erases all settings that you have stored, and returns
them to the factory-set condition. For details on the settings that
are reset, refer to “Settings Saved Even If the Power Is Turned O” (p.
35).
MEMO
Executing this function does not erase the les in internal memory
or on a USB ash drive (commercially available). If you want to erase
all les from internal memory or from a USB ash drive, refer to
(“Initializing the Memory (Format Media)” (p. 30)).
1. Press the [ ] button.
The button is lit, and the piano is in function mode.
2. Turn the [ ] knob to access “Factory Reset” screen,
and then press the [ ] knob.
A conrmation message appears.
If you decide to cancel, press the [ ] button.
3. Turn the [ ] knob to select “Yes,” and press the [ ]
knob to conrm.
The memory is reset to its factory values.
NOTE
Never turn o the power or remove the USB ash drive while the
screen indicates “Executing...”
4. Turn the power o, then on again.
Disabling the Buttons (Panel Lock)
To prevent settings from being accidentally changed while you perform, you can disable all buttons other than the [L] button and the
[Volume] buttons.
Lock the panel
Hold down the [
] button until the screen shows the “ ” symbol.
Unlock the panel
Hold down the [
] button until the “ ” symbol disappears.