User's Manual

34
Convenient Functions
Indication Value Explanation
Left Pedal
Changing the Eect of the Pedal (Left Pedal)
When you turn on the power, the left pedal functions as a soft pedal (p. 7, p. 11) . You can change the function of the pedal to
a variety of other operations. By assigning a function to the pedal, you can instantly change a setting by pressing the pedal while
you perform.
Sostenuto The pedal functions as a sostenuto pedal.
Play/Stop
The pedal has the same function as the [s] button.
Layer
Pressing the pedal will layer on Tone 2, used for Dual Play.
* This is available only when using Dual Play.
MIDI-related settings
Local Control
Preventing Doubled Notes When Connected to a Sequencer (Local Control)
When you have a MIDI sequencer connected via USB, set this parameter to Local O.
Since most sequencers have their Thru function turned on, notes you play on the keyboard may be sounded in duplicate, or
get dropped. To prevent this, you can enable the “Local O” setting so that the keyboard and internal sound generator will be
disconnected.
O
Local Control is o.
The keyboard is disconnected from the internal sound generator. Playing the keyboard will not produce sound.
On Local Control is on. The keyboard is connected to the internal sound generator.
MIDI
Transmit Ch.
MIDI Transmit Channel Settings (MIDI Transmit Ch.)
This setting species the MIDI channel on which the unit will transmit.
This unit will receive all sixteen channels (1–16).
O, 1–16
Overall operation settings
Language
Changing the Language Displayed in the Screen (Language)
You can change the language that is displayed in the screen.
English, Japanese, Chinese
Display
Contrast
Adjusting the Brightness of the Display (Display Contrast)
You can adjust the brightness of the display.
1–10
Screen Saver
Specifying the Time Until the Operating Panel Dims (Screen Saver)
When no operation has been performed for a specied length of time, the display will go blank and the operating panel button
LEDs will go dark. The display reappears when you perform an operation.
You can specify the time until the panel goes dark.
O, 30 sec., 1 min. (default value), 5 min., 10 min.
Volume Limit
Specifying a Maximum Volume (Volume Limit)
You can specify a maximum volume value. This lets you prevent loud sound from being produced unintentionally.
MEMO
You can also set the volume limit by turning the [ ] knob while holding down the [ ] button and the [ ] button.
20, 40, 60, 80, 100
Speaker Auto
Mute
Outputting Sound Both from Headphones and Internal Speakers (Speaker Auto Mute)
With the factory settings, sound is no longer output from the internal speaker when you connect headphones to the PHONES
jack. However, you can change this setting so that sound is output both from the headphones and from the internal speakers.
* If this is “O,” the sound that is output from the headphones will have a dierent character.
O Sound is heard both from headphones and the internal speakers.
On Sound is heard only from the headphones (default value).