RT-10KST_e.fm 1 ページ 2007年4月10日 火曜日 午後3時20分 Owner’s Manual Thank you, and congratulations on your choice of the Roland RT-10 series. 201a Before using this unit, carefully read the sections entitled: “USING THE UNIT SAFELY” and “IMPORTANT NOTES” (p. 2; p. 3). These sections provide important information concerning the proper operation of the unit.
RT-10KST_e.fm 2 ページ 2007年4月10日 火曜日 午後3時20分 USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
RT-10KST_e.fm 3 ページ 2007年4月10日 火曜日 午後3時20分 IMPORTANT NOTES 291a In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and observe the following: Placement 354a • Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle, or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.
RT-10KST_e.fm 4 ページ 2007年4月10日 火曜日 午後3時20分 Before You Start Contents of the Package • • • • Drum trigger Connection cable Owner’s Manual (this manual) Two hoop guards (RT-10K only) Features • • • • • • Works perfectly with Roland V-Drums Modules High-Accuracy Sensor for Perfect Triggering Dual Trigger for Head & Rim (only RT-10S Snare Trigger) Mounts Easily and Quickly on Hoop Adjustable-Sensor System for Hoop Height Compatible with Various Size of Acoustic Drums Parts Descriptions fig.
RT-10KST_e.fm 5 ページ 2007年4月10日 火曜日 午後3時20分 Before You Start Drum Triggers-Definition A drum trigger uses a built-in sensor to sense the timing and velocity (force) of how the drum is played. Then these trigger signals and transmitted to the sound module. Vibration Trigger Signal Percussion Sound Module Audio Trigger MIDI Converter MIDI The RT-10K Kick Trigger and RT-10T tom trigger support head triggering. The RT-10S Snare Trigger supports separate head/rim dual triggering. Setting Up 1.
RT-10KST_e.fm 6 ページ 2007年4月10日 火曜日 午後3時20分 Mounting The Drum Trigger Important Things To Know • Set up your drums, making sure that any trigger-mounted drum is NOT in contact with another drum or stand. Vibrations transmitted from such direct contact can cause unwanted triggering. Make sure the snare drum is secure in its stand. Muffling (muting) of the drums can help reduce excess vibrations of the drum trigger, which will improve triggering accuracy.
RT-10KST_e.fm 7 ページ 2007年4月10日 火曜日 午後3時20分 Mounting The Drum Trigger fig.RT-10K-toritsuke Hoop Guard RT-10K 1. Attach the included hoop guards (2) to the inner and outer sides of the kick drum hoop. • • Attach the hoop guards at one of the positions indicated in the figure. We suggest these positions in order to keep the trigger as far away from the snare drum or tom toms as possible. Make sure the hoop guards to not touch any of the tension bolts. 2.
RT-10KST_e.fm 8 ページ 2007年4月10日 火曜日 午後3時20分 Mounting The Drum Trigger Adjusting the Sensor Position (Sensor Bolt) Set the sensor bolt so that the sensor compresses approximately 2–3 mm when pressed against the head. * The position of the secured sensor and the amount of this compression play an important role in the performance of the trigger. * Make sure that the sensor constantly remains in contact with the head, even when playing the drum. * This setting is very important.
RT-10KST_e.fm 9 ページ 2007年4月10日 火曜日 午後3時20分 Setting Trigger Parameters in a Percussion Sound Module Setting Up Your Percussion Sound Module Correct trigger type and parameter settings provide accurate triggering. Threshold Threshold level determines the point at which the signal from the drum trigger actually triggers a sound. You can look at the chart below to understand this. Threshold A B C We have included an extensive list of percussion sound modules with their respective parameter settings.
RT-10KST_e.fm 10 ページ 2007年4月10日 火曜日 午後3時20分 Setting Trigger Parameters in a Percussion Sound Module retriggering, it then becomes easy for sounds to be omitted when the drums played fast (roll etc.). * Muting the drum can work to suppress disruptions in the trigger waveform. Crosstalk Cancel/ XTalk Cancel Crosstalk is a problem in which the vibrations and sounds from a drum when it is struck ends up triggering other drums.
RT-10KST_e.fm 11 ページ 2007年4月10日 火曜日 午後3時20分 Troubleshooting Normally, you should not have any problems if you have read this manual carefully, followed the instructions and have carefully taken into consideration the multiple variables regarding using drum triggers; type of drum, head, muffling, playing style, acoustic environment etc. No Sound is Triggered • • Check all connections, and make sure the trigger sensor is touching the head as explained on page 8.
RT-10KST_e.fm 12 ページ 2007年4月10日 火曜日 午後3時20分 Troubleshooting Sounds Are Triggered Without Playing the Drums • • Is the volume too loud of nearby monitor speakers? If in a band situation, is the bass amp too close or too loud? No Sound When Playing Softly • Adjust the “Threshold” value. (p. 9) No Sound From the Rim when Playing a Rim Shot or Just the Rim Separate triggering from the rim is only possible when using the RT-10S snare trigger. • • • Make sure the cable is Stereo.
RT-10KST_e.fm 13 ページ 2007年4月10日 火曜日 午後3時20分 Specifications RT-10K (Kick Trigger) RT-10S (Snare Trigger) Trigger: Connector: Triggers: Connector: 1 (Head) Trigger Output Jack (1/4 inch Phone Type) Dimensions: approx. 40 (W) x 110 (D) x 70 (H) mm approx. 1-5/8 (W) x 4-3/8 (D) x 213/16 (H) inches Weight: 90 g 4 oz Accessories: Connection Cable, Hoop Guard, Owner’s Manual Guide for Installation: Rim Height: 30 to 36 mm 1-3/16 to 1-7/16 inch Rim Thickness (Max.
RT-10KST_e.fm 14 ページ 2007年4月10日 火曜日 午後3時20分 Percussion Sound Module Parameter Settings Following you will find specific parameter settings for the indicated percussion sound modules. These are VERY important. If needed, please refer to the Owner’s Manual of your module. * The trigger parameters should be adjusted as necessary to match the actual state of your configuration, and the environment in which it is being used.
RT-10KST_e.fm 15 ページ 2007年4月10日 火曜日 午後3時20分 Percussion Sound Module Parameter Settings TD-3 (Percussion Sound Module) RT-10S Snare Trigger Dual Trigger Compatible Inputs SNARE Parameter RT-10K Kick Trigger RT-10S Snare Trigger RT-10T Tom Trigger Trig Type Sensitivity tYP SnS t7K 9 t5S 10 t3t 10 Threshold Curve Scan Time Retrig Cancel Crosstalk Mask Time Rim Sens Rim Gain thr Cur Scn rtG CrS MSK rMS rMG 10 Lnr 2.5 8 50 12 --------- 10 Lnr 2.5 4 50 12 11 1.0 12 Lnr 2.
RT-10KST_e.
RT-10KST_e.
RT-10KST_e.fm 18 ページ 2007年4月10日 Information AFRICA EGYPT Al Fanny Trading Office 9, EBN Hagar A1 Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: 20-2-417-1828 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 SOUTH AFRICA T.O.M.S. Sound & Music (Pty)Ltd. 2 ASTRON ROAD DENVER JOHANNESBURG ZA 2195, SOUTH AFRICA TEL: (011)417 3400 FAX: (011)417 3462 Paul Bothner(PTY)Ltd.