User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Before You Start
- Mounting The Drum Trigger
- Setting Trigger Parameters in a Percussion Sound Module
- Troubleshooting
- No Sound is Triggered
- Multiple Sounds Played When Drum Is Struck Only Once (Retrigger)
- Playing One Drum Causes a Sound Assigned to the Trigger of Another Drum to Sound
- Sounds Are Triggered Without Playing the Drums
- No Sound When Playing Softly
- No Sound From the Rim when Playing a Rim Shot or Just the Rim
- Same Sound from the Rim and Head
- Dynamic Response Seems Strange
- Specifications
- Percussion Sound Module Parameter Settings
12
Troubleshooting
• Is the volume too loud of nearby monitor speakers?
• If in a band situation, is the bass amp too close or too loud?
• Adjust the “Threshold” value. (p. 9)
Separate triggering from the rim is only possible when using the RT-10S snare trigger.
• Make sure the cable is Stereo.
• Verify that the trigger input you are using is rim-shot capable. (p. 14)
• Verify your trigger parameter settings in the module you are using. (p. 14)
• This is normal if you are not using the RT-10S snare trigger.
• Adjust the “Sensitivity” value. (p. 9)
Sounds Are Triggered Without Playing the Drums
No Sound When Playing Softly
No Sound From the Rim
when Playing a Rim Shot or Just the Rim
Same Sound from the Rim and Head
Dynamic Response Seems Strange
RT-10KST_e.fm 12 ページ 2007年4月10日 火曜日 午後3時20分