User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Before You Start
- Mounting The Drum Trigger
- Setting Trigger Parameters in a Percussion Sound Module
- Troubleshooting
- No Sound is Triggered
- Multiple Sounds Played When Drum Is Struck Only Once (Retrigger)
- Playing One Drum Causes a Sound Assigned to the Trigger of Another Drum to Sound
- Sounds Are Triggered Without Playing the Drums
- No Sound When Playing Softly
- No Sound From the Rim when Playing a Rim Shot or Just the Rim
- Same Sound from the Rim and Head
- Dynamic Response Seems Strange
- Specifications
- Percussion Sound Module Parameter Settings
13
Specifications
RT-10K (Kick Trigger)
Trigger: 1 (Head)
Connector: Trigger Output Jack (1/4 inch
Phone Type)
Dimensions: approx. 40 (W) x 110 (D) x 70 (H) mm
approx. 1-5/8 (W) x 4-3/8 (D) x 2-
13/16 (H) inches
Weight: 90 g
4 oz
Accessories: Connection Cable, Hoop Guard,
Owner’s Manual
Guide for Installation:
Rim Height: 30 to 36 mm
1-3/16 to 1-7/16 inch
Rim Thickness (Max.): 13 mm
9/16 inch
fig.RT-10K-rimsize
RT-10S (Snare Trigger)
Triggers: 2 (Head, Rim)
Connector: Trigger Output Jack (Stereo 1/4
inch Phone Type)
Dimensions: approx. 40 (W) x 110 (D) x 50 (H) mm
approx. 1-5/8 (W) x 4-3/8 (D) x 2 (H)
inches
Weight: 80 g
3 oz
Accessories: Connection Cable, Owner’s
Manual
Guide for Installation:
Rim Height: 11 to 15 mm
7/16 to 5/8 inch
RT-10T (Tom Trigger)
Triggers: 1 (Head)
Connector: Trigger Output Jack (1/4 inch
Phone Type)
Dimensions: approx. 40 (W) x 110 (D) x 50 (H) mm
approx. 1-5/8 (W) x 4-3/8 (D) x 2 (H)
inches
Weight: 80 g
3 oz
Accessories: Connection Cable, Owner’s
Manual
Guide for Installation:
Rim Height: 11 to 15 mm
7/16 to 5/8 inch
fig.RT-10S-rimsize1
962a
* In the interest of product improvement, the
specifications and/or appearance of this unit are
subject to change without prior notice.
13
30–36
11–15
RT-10KST_e.fm 13 ページ 2007年4月10日 火曜日 午後3時20分