User Manual
Table Of Contents
- USING THE UNIT SAFELY
- IMPORTANT NOTES
- Before You Start
- Mounting The Drum Trigger
- Setting Trigger Parameters in a Percussion Sound Module
- Troubleshooting
- No Sound is Triggered
- Multiple Sounds Played When Drum Is Struck Only Once (Retrigger)
- Playing One Drum Causes a Sound Assigned to the Trigger of Another Drum to Sound
- Sounds Are Triggered Without Playing the Drums
- No Sound When Playing Softly
- No Sound From the Rim when Playing a Rim Shot or Just the Rim
- Same Sound from the Rim and Head
- Dynamic Response Seems Strange
- Specifications
- Percussion Sound Module Parameter Settings
3
IMPORTANT NOTES
291a
In addition to the items listed under “USING THE UNIT SAFELY” on page 2, please read and
observe the following:
Placement
354a
• Do not expose the unit to direct sunlight, place it near devices that radiate heat, leave it inside an enclosed vehicle,
or otherwise subject it to temperature extremes. Excessive heat can deform or discolor the unit.
Maintenance
401a
• For everyday cleaning wipe the unit with a soft, dry cloth or one that has been slightly dampened with water. To
remove stubborn dirt, use a cloth impregnated with a mild, non-abrasive detergent. Afterwards, be sure to wipe
the unit thoroughly with a soft, dry cloth.
402
• Never use benzine, thinners, alcohol or solvents of any kind, to avoid the possibility of discoloration and/or
deformation.
Additional Precautions
553
• Use a reasonable amount of care when using the unit’s buttons, sliders, or other controls; and when using its jacks
and connectors. Rough handling can lead to malfunctions.
556
• When connecting / disconnecting all cables, grasp the connector itself—never pull on the cable. This way you will
avoid causing shorts, or damage to the cable’s internal elements.
558b
• To avoid disturbing your neighbors, try to keep the unit’s volume at reasonable levels (especially when it is late at
night).
988
• Security Slot ( )
http://www.kensington.com/
RT-10KST_e.fm 3 ページ 2007年4月10日 火曜日 午後3時20分