User Manual

ManualsBrandsRoland ManualsControl UnitsTM-2 Trigger Module - COMPACT TRIGGER MODULE

ENG

JPN

DEU

FRA

ITA

ESL

POR

NLD

Panel Descriptions

* The explanations in this manual include illustrations that depict what should typically be shown by the display. Note, however, that your

unit may incorporate a newer, enhanced version of the system (e.g., includes newer sounds), so what you actually see in the display may

not always match what appears in the manual.

[INST] button

• Displays the instrument edit screen.

p. 11

• If you hold down the [SHIFT] button

and press the [INST] button, the

setup screen appears.

p. 14

Display

When you turn on the power, the display shows the kit number

and name. If you press the [INST] button, the display shows

parameters and values.

Display settings p. 14

[-] [+] buttons

Use these buttons to switch kits.

In screens such as the edit screen, use these

buttons to edit parameter values.

[SHIFT] button

You can access a variety of functions by using

this in conjunction with other buttons.

[VOLUME] knob

Adjusts the volume of the OUTPUT jacks and

PHONES jack.

TRIG IN [1] [2] buttons

• When you strike a pad, the corresponding TRIG IN [1] [2]

button lights.

• When editing an instrument, use the TRIG IN [1] [2] buttons to

select the pad whose settings you want to change. To select

the rim, hold down the [SHIFT] button and press a TRIG IN

button. (Head, Rim

p. 8)

Preview

When you press a TRIG IN button, the instrument will sound,

allowing you to audition the tone. You can also change a setting

so that sound is not heard when you press the button. p. 14

Trigger lock on/o

If you long-press the TRIG IN [1] or [2] button, the target for

editing will not change even when you strike the pads. p. 14

[<] [>] buttons

Use these buttons to switch parameters or pages.

SOUND OFF p. 8

MUTE p. 8

SD card slot

You can insert an SD card into this slot.

Push the SD card once again to eject.

* Never insert or remove an SD card while this unit is turned

on. Doing so may corrupt the data on the SD card.

* Carefully insert the SD card all the way in—until it is rmly in

place.

[ ] (Power) button

Turns the power on/o. Hold down the button until the power

turns on or o. p. 6