User Manual

8
Selecting a Kit
Your choice of sounds (instruments) assigned to the connected pads are saved as a “kit.”
The TM-2 lets you easily select and play 99 dierent kits.
KIT 99
KIT 01
EFFECT
HEAD
TRIG IN 1
INST INST
RIM HEAD
TRIG IN 2
INST INST
RIM
Pads
Head
Rim
Head
Rim
Selecting a Kit
Immediately after the power is turned on, the display shows the “kit screen.”
* If any other screen is shown, press the [INST] button several times to make the kit screen appear.
1.
Press the [-] [+] buttons.
The selected kit will change.
When you strike the pads, you hear the instruments of that kit.
Kit number
Kit name
Mute
In the kit screen, you can hold down the [<] button to turn on
the mute function, so that striking a pad won’t produce sound.
This lets you prevent sound from being produced inadvertently.
Press the [<] button once again to turn the mute function o.
Sound o
By pressing the [<][>] buttons simultaneously you can stop the sounds that are being heard. This is a
convenient way to stop a song or a loop. The sound of reverb or delay will continue.
Preview
By pressing the TRIG IN [1] or [2] button, you can play the instruments. To play the sound of the rim, hold
down the [SHIFT] button and press the TRIG IN [1] or [2] button.