User Manual

21
Video Eect Operations
You can apply eects to the main output video. The V-1HD has nine types of built-in lter eects and ten types
of built-in compositing eects.
Using Filter Eects
These apply eects such as changes in video color tone and appearance to the entire video.
You can set lter eects separately for the video on bus A and on bus B.
Selecting a Filter Eect
1. Press the [MEMORY] button to display the
MEMORY menu.
2. Use the [ ] and [ ] buttons to select “EFFECTS
A” or “EFFECTS B.”
3. Use the A/B fader to select the lter eect to
assign to the EFFECTS A or B [ON] button.
Value Explanation
NEGATIVE Inverts the brightness and colors.
EMBOSS Adds a bas-relief eect to the video.
COLORIZE Adds color to the video.
COLORPASS
Produces monochrome video with a
specic color remaining.
POSTERIZE Changes the gradations in brightness.
SILHOUETTE
Separates the video into light and dark
areas, and makes the dark areas black and
adds a dierent color to the light areas.
MONOCOLOR Produces monochrome video.
FINDEDGE Extracts contours.
FLIP Flips the video.
4. Press the [MEMORY] button to quit the menu.
MEMO
5 You can change the eect type by holding down the
EFFECTS A [ON] button and turning the [EFFECTS A]
knob. You can change EFFECTS B as well in the same way.
Press and hold the [(TAP) BPM] button g set “EFFECTS
TYPE CHANGE” at the SETUP menu to “ON.”
Applying Filter Eects
1. Output the video to which you want to apply
an eect.
2. Press the EFFECTS A or B [ON] button to turn on
the eect (lighted).
You can turn on eects separately for the output
video signals on bus A and bus B.
3. Turn the [EFFECTS A] or [EFFECTS B] knob to
adjust the degree of eect applied.
4. To turn o an eect, press the EFFECTS A or B
[ON] button a second time.