User Manual

22
Video Eect Operations
Using Compositing Eects
These composite the bus A video and the bus B video.
* When compositing eects are turned on for either bus A or bus B, no eects can be applied to the other bus.
Selecting a Compositing Eect
1. Press the [MEMORY] button to display the
MEMORY menu.
2. Use the [ ] and [ ] buttons to select “EFFECTS
A” or “EFFECTS B.”
3. Use the A/B fader to select the compositing eect
to assign to the EFFECTS A or B [ON] button.
Value Explanation
WHT-L.
KEY
Makes white areas of the video transparent and
composites it onto a background video.
BLK-L.
KEY
Makes black areas of the video transparent and
composites it onto a background video.
GRN-C.
KEY
Extracts the green portions of the video and
composites it onto a background video.
BLU-C.
KEY
Extracts the blue portions of the video and
composites it onto a background video.
PinP
1/4
Composites video in an inset screen onto a
background video. The horizontal size of the inset
screen is 1/4 the width of the background video.
PinP
1/3
Composites video in an inset screen onto a
background video. The horizontal size of the inset
screen is 1/3 the width of the background video.
PinP
1/2
Composites video in an inset screen onto a
background video. The horizontal size of the inset
screen is 1/2 the width of the background video.
SPLIT-
VS
Composites the video stretched
vertically.
A B
A B
A B
A B
A
B
A
B
A
B
A
B
SPLIT-
VC
Composites the video with its
center section vertically cropped.
A B
A B
A B
A B
A
B
A
B
A
B
A
B
SPLIT-
HS
Composites the video stretched
horizontally.
A B
A B
A B
A B
A
B
A
B
A
B
A
B
SPLIT-
HC
Composites the video with
its center section horizontally
cropped.
A B
A B
A B
A B
A
B
A
B
A
B
A
B
4. Press the [MEMORY] button to quit the menu.
MEMO
5 You can change the eect type by holding down the
EFFECTS A [ON] button and turning the [EFFECTS A]
knob. You can EFFECTS B as well in the same way.
Press and hold the [(TAP) BPM] button g set “EFFECT
TYPE CHANGE” at the SETUP menu to “ON.”
Compositing Using Luminance Key
This composites video with white or black areas
made transparent onto a background video.
Using luminance keying lets you superimpose logos
or text onto a background picture.
1. Follow the procedure in “Selecting a
Compositing Eect” on this page to select
“WHT-L.KEY” or “BLK-L.KEY.”
2. Press the EFFECTS A (or B) [ON] button to turn
on the eect (lighted).
3. Press the [A-1] through [A-4] and [B-1]
through [B-4] buttons to separately select
the background and the picture you want to
display in the foreground.
The video on the bus at the position where you
turned on the eect in step 2 is displayed in the
foreground.
4. Turn the [EFFECTS A] and [EFFECTS B] knobs to
adjust the amount of eect applied.
[EFFECTS A] knob
This adjusts the amount of keying for
the foreground video.
[EFFECTS B] knob
This adjusts the degree of edge blur for
the foreground video.
5. To turn o an eect, press the EFFECTS A (or B)
[ON] button a second time.