User Manual

30
Appendices
Menu List
* The menu is shown on the monitor connected to the PREVIEW connector (p. 9).
MEMORY Menu
([MEMORY] button g [A-1]–[A-4] and [B-1]–[B-4] buttons)
Menu item Value Explanation
MEMORY1–MEMORY8
EFFECTS A
NEGATIVE, EMBOSS, COLORIZE, COLORPASS,
POSTERIZE, SILHOUETTE, MONOCOLOR,
FINDEDGE, FLIP, WHT-L.KEY (*1), BLK-L.KEY (*1),
GRN-C.KEY (*1), BLU-C.KEY (*1), PinP 1/4 (*1),
PinP 1/3 (*1), PinP 1/2 (*1), SPLIT-VS (*1),
SPLIT-VC (*1), SPLIT-HS (*1), SPLIT-HC (*1)
Species the eect assigned to the EFFECTS A [ON] button.
EFFECTS B
NEGATIVE, EMBOSS, COLORIZE, COLORPASS,
POSTERIZE, SILHOUETTE, MONOCOLOR,
FINDEDGE, FLIP, WHT-L.KEY (*1), BLK-L.KEY (*1),
GRN-C.KEY (*1), BLU-C.KEY (*1), PinP 1/4 (*1),
PinP 1/3 (*1), PinP 1/2 (*1), SPLIT-VS (*1),
SPLIT-VC (*1), SPLIT-HS (*1), SPLIT-HC (*1)
Species the eect assigned to the EFFECTS B [ON] button.
WIPE (*2)
H-DOWN, H-UP, V-RIGHT, V-LEFT, V-IN, V-OUT, H-IN,
H-OUT, R-DOWN, L-DOWN, R-UP, L-UP, BLOCK,
V-GRID, H-GRID, H-DOWN/s, H-UP/s, V-RIGHT/s,
V-LEFT/s, H-IN/s, H-OUT/s, V-IN/s, V-OUT/s,
R-DOWN/s, L-DOWN/s, R-UP/s, L-UP/s, BLOCK/s,
V-GRID/s, H-GRID/s
Species the transition pattern assigned to the [WIPE]
button.
* Setting values indicated with “/s” are soft edge transition
patterns.
MIX (*2) MIX, FAM, NAM, MOSAIC
Species the transition pattern assigned to the [MIX]
button.
TRANSFORMER A
NONE, TRANSFORM,
, , WHITE, BLACK,
BPM SYNC, WIPE, MIX, CUT, EFFECTS
Species the Function assigned to the TRANSFORMER [
]
button.
TRANSFORMER B
NONE, TRANSFORM,
, , WHITE, BLACK,
BPM SYNC, WIPE, MIX, CUT, EFFECTS
Species the Function assigned to the TRANSFORMER [
]
button.
TRANSFORM TIME
0.0–4.0sec, BPM x 1/4, BPM x 1/2, BPM x 1,
BPM x 2
Species the length of time for applying a video transition.
If PinP compositing is turned on for bus A, use the following items to adjust the inset screen.
PinP A CROPPING H 1–100% Adjusts the horizontal size of the inset screen.
PinP A CROPPING V 1–100% Adjusts the vertical size of the inset screen.
PinP A VIEW POS H -50–50%
Adjusts the horizontal position of the video shown in the
inset screen.
PinP A VIEW POS V -50–50%
Adjusts the vertical position of the video shown in the
inset screen.
If PinP compositing is turned on for bus B, use the following items to adjust the inset screen.
PinP B CROPPING H 1–100% Adjusts the horizontal size of the inset screen.
PinP B CROPPING V 1–100% Adjusts the vertical size of the inset screen.
PinP B VIEW POS H -50–50%
Adjusts the horizontal position of the video shown in the
inset screen.
PinP B VIEW POS V -50–50%
Adjusts the vertical position of the video shown in the
inset screen.
(*1) When eects are turned on for either bus A or bus B, no eects can be applied to the other bus.
(*2) For more information about transition patterns, refer to “Transition Eects List” (p. 37).