User Manual

35
Appendices
Menu item Value (bold text: default value) Explanation
WIPE SW ON, OFF
[WIPE] button
MIX SW ON, OFF
[MIX] button
CUT SW ON, OFF
[CUT] button
FREEZE SW ON, OFF
[FREEZE] button
MEMORY SW ON, OFF
[MEMORY] button
AUDIO SW ON, OFF
[AUDIO] button
EFFECTS SW ON, OFF
EFFECTS A and EFFECTS B [ON] buttons
EFFECTS VOL ON, OFF
[EFFECTS A] and [EFFECTS B] knobs
OUTPUT FADE VOL ON, OFF
[OUTPUT FADE] knob
A/B FADER ON, OFF
A/B fader
NO SIGNAL BACK BLACK, BLUE Species the background color of channels that have no video input.
UNFIT SIGNAL BACK BLACK, BLUE, THRU
Species the background color of channels on which video of an
incompatible format is input.
If this is set to “THRU,” video in an unsupported format is output
unchanged, allowing conrmation of the status of the input signal.
Note, however, that the video might contain additional noise artifacts.
EFFECTS TYPE CHANGE ON, OFF
If this is “ON,” eect assignments are changed by holding down the
EFFECTS A [ON] button and turning the [EFFECTS A] knob. Operation
for EFFECTS B is the same.
WIPE TYPE CHANGE ON, OFF
If this is “ON,” the wipe transition pattern changes with each press of the
[WIPE] button.
MIX TYPE CHANGE ON, OFF
If this is “ON,” the mix transition pattern changes with each press of the
[MIX] button.
OUTPUT FADE LEFT
Species the functions when turning the [OUTPUT FADE] knob counter-clockwise.
BLACK The output video is faded-in/out to a black screen.
AUDIO Adjusts the output volume.
BLK & AUD
Fades-in/out the output video and audio simultaneously. The video
fades to a black screen.
OUTPUT FADE RIGHT
Species the functions when turning the [OUTPUT FADE] knob clockwise.
WHITE The output video is faded-in/out to a white screen.
AUDIO Adjusts the output volume.
WHT & AUD
Fades-in/out the output video and audio simultaneously. The video
fades to a white screen.
AUTO OFF ON, OFF
Turns the Auto O function on/o.
When set to “ON,” the power to the V-1HD is automatically turned o if
240 minutes elapse with no operation performed on the unit.
COLOR BAR OUTPUT ON, OFF Setting this to “ON” outputs a color bar.
TEST TONE OUTPUT ON, OFF Setting this to “ON” outputs a test tone.
A/B FADER CALIBRATE —
Calibrates (adjusts) the A/B fader. When you move the A/B fader to the
bus A position, instructions appear in the screen.
In some cases, such as after extended use or after the unit is
transported, it might occur that the video is no longer output at 100%
when the A/B fader is moved all the way to the bus A or bus B position.
If this occurs, execute A/B fader calibration.
FRAME RATE 59.94, 50 Species the frame rate.
FACTORY RESET —
Returns the unit to its factory defaults. When you move the A/B fader to
the bus A position, instructions appear in the screen.
VERSION — Displays the version of the system program.