User guide

104
Basic operation of the VariOS
Assigning a name
Several screens of the VariOS allow you to assign a name. (For example, Menu 6-2 Sample Rename or
8-2 Save.)
Regardless of the type of name you are assigning, the procedure is the same.
Access the screen in which you want to assign a name, and use the following procedure.
1. Use the [CURSOR] buttons to move the cursor to the location where you want to enter a
character.
fig.042-0031
2. Turn the [VALUE] knob to specify the desired character.
You can use the following characters and symbols.
By turning the [VALUE] knob while pressing it, you can conveniently shift between
uppercase characters, lowercase characters, numerals, symbols, and spaces. (Lowercase
characters will not be displayed for a volume label.)
3. Press the [VALUE] knob, and the display will ask “Are You Sure?” Press the [VALUE] knob
once again to finalize the name.
If you press the [EXIT] button you’re returned to the name entry screen.
In any of the name entry screens, you can press the [EXIT] button to discard the currently edited
name and return to the previous screen.
fig.042-0032
Performance: up to 16 characters
Sample: up to 12 characters
Folder: up to 16 characters
Volume label: up to 11 characters
For a performance, sample, or folder A--Z a--z 0--9 ! # $ % & ' ( ) + - = @ [ ] ^ _ ` { } space
For a volume label A--Z 0--9 $ % ' - _ @ ! ` ( ) ~
Cursor (underline)