User guide

107
Basic operation of the VariOS
■ Tempo sync setting
If you want to play back the sample at its original tempo, turn off Tempo Sync (this is a part
parameter).
Tempo Sync specifies whether the playback speed of the sample assigned to each part will
synchronize to the master tempo or external clock (ON), or will not synchronize (OFF).
Procedure:
1. Press the [MENU] button so it’s lighted, and access the MENU screen.
fig.042-006
* The MENU screen displays the menu that you selected most recently. You need to go to the top level
menu. You can get there by pressing and continuing to hold the [MENU] button for a few moments
(when the [MENU] button is not illuminated), or by pressing the [EXIT] button.
2. Turn the [VALUE] knob to select “MENU2 Part Edit,” and press the [VALUE] knob.
fig.042-0062
3. Turn the [VALUE] knob to select “Menu2-3 Tempo Sync,” and press the [VALUE] knob.
fig.042-0063
4. Use the [CURSOR] buttons to move the cursor to the part number, and turn the [VALUE] knob to
select a part.
fig.042-0064
5. Use the [CURSOR] buttons to move the cursor to the “ON” (or OFF) location, and turn the
[VALUE] knob to switch the setting ON/OFF.
fig.042-0065
While V-Producer is being used, V-Producer will automatically turn tempo sync “ON”
for all parts. This will cause the VariOS to synchronize to the tempo of V-Producer.
* If the master tempo is set to a value four times or more of the original tempo of the sample (p. 57), it will
not be possible to synchronize the sample to the master tempo.
Menu name
light