User guide

131
Synchronization settings
Next, make settings so that V-Producer will synchronize to the MIDI clock
data transmitted from Digital Performer.
fig.05syncDigiPfm04
5
From V-Producer’s [Option] menu, choose “MIDI
Sync...”
6
In the Sync Mode dialog box, set the Sync IN “IN” field to “Roland
VariOS Sync” as shown below.
fig.05syncDigiPfm05
7
In the Sync IN “Type of sync” field, select “MIDI Clock.”
8
Click [OK] to close the Sync Mode dialog box.
fig.05syncDigiPfm02
9
From V-Producer’s [Option] menu, choose “MIDI
Settings...”
10
In the FreeMIDI MIDI Settings dialog box, uncheck
the “MIDI Clock” box.
fig.05syncDigiPfm07
11
Click [OK] to close the FreeMIDI MIDI Settings dialog box.
Select Roland VariOS Sync
Step 10 is a special setting
used when you want to
synchronize V-Producer
and Digital Performer. If
you fail to uncheck this
b
ox, V-Producer will play
at double speed when
synchronized. If you want
to play V-Producer in
Internal Mode, check this
b
ox once again.
Important!! Uncheck this box.