User guide

136
Synchronization settings
Synchronizing as the master (MTC)
1
Choose Option - MIDI Sync.
2
In the Sync Mode dialog box’s Sync IN area, set Type of sync to
“Internal.”
* You can obtain the same result by pressing th [INT] button of the locator section.
3
In the Sync OUT area, set the OUT field to the MIDI device that you will
use to output the synchronization data.
4
In the Sync OUT field, select MIDI Time Code.
5
In the SMPTE Offsets field, specify the starting time of the SMPTE time
code that will be transmitted.
6
In the SMPTE Frame Rate field, specify the MTC frame rate to be
transmitted.
7
Click [OK]. Now V-Producer will transmit MTC as the master device.
Synchronization settings on the slave device(s)
For details on how to make settings in your other software or external device
so that it will operate as a MTC slave, refer to the manual for your software
or device.
For details on setting the
starting time of the SMPTE
time code, refer to “SMPTE
Offsets” within the “MIDI
Sync” section of the
reference manual (PDF).
For details on the SMPTE
Frame Rate, refer to
“SMPTE Frame Rate”
within the “MIDI Sync”
section of the reference
manual (PDF).