User guide

2
LEGATO button
fig
If this button is ON, each note of the arpeggio will be played legato;
the gate time knob setting will be ignored. You can use this to
produce a distinctive arpeggio effect that occupies the entire phrase.
Keyboard
fig
You can click the keyboard area to audition the sample selected in the
Sample List. At this time, the keys will light yellow according to the
note you clicked. The keys will also light yellow in response to note-
on messages from an external MIDI keyboard, or note-on data from a
playing part specified by the part buttons.
VIEW NOTE NAME button
fig
By pressing this button you can switch the note names of the note-on
keys between displayed and hidden.
USE PC KEY button
fig
After pressing this button, you will be able to turn notes on/off from
the keyboard of your computer.
fig
The keys of your computer keyboard
will correspond to notes as shown in
the diagram.
Use the left/right keys to shift the
octave. To exit this function, press this
button again.
VariOS Pad
Owner’s Manual p.96
The VariOS Keyboard's Surface controller is now independent, and a
new VariOS Pad screen has been added.
fig
(Click this icon to) Start up VariOS Pad.
fig
Target Part button
fig
When you click the Part button, VariOS Pad control data will be sent
to the selected part. Pitch, time, and formant data for the selected part
will be reflected by the Surface controller and knobs. If all part
buttons are off, the sample selected in the Sample List will be
controlled.
* If you use the VariOS Pad to control the selected part while you
perform, the pitch, time, and formant data originally stored in the frame
of the part will be ignored; the control data from the VariOS Pad will
take priority. If the part button is off, the pitch, time, and formant data
stored in the frame of the part will be used.
* When you specify the target part, knob operations on the VariOS itself
will also apply to the part you select here.
Surface controller
fig
ASSIGN buttons
fig
PITCH/TIME/FORMANT knobs
fig
You can drag these knobs to control the pitch/time/formant.
These knobs are linked with the Surface controller.
Resetting PITCH/TIME/FORMANT
When you press the [X] key, any pitch/time/formant values that
have been modified by means of the knobs or Surface controller will
be reset to their center values.
Inputting TIME zero
TIME zero will be input while you hold down the [Z] key. When you
release the key, the time will return to the center value. This is a
convenient way to rhythmically input a TIME zero value to create the
distinctive VariPhrase "buzz."
By dragging the mouse inside this
frame, you can simultaneously
control both pitch and time.
By clicking an ASSIGN button you
can assign the [P] pitch, [T] time,
and [F] formant parameters to each
axis.
It is possible to specify the same
parameter for the X-axis and Y-axis;
e.g., PITCH-PITCH or TIME-TIME.
However, in this case, the X-axis
movement will be ignored, and
control will occur only on the Y-
axis.