User guide

50
Turning the VariOS on/off
Turning off the VariOS when connected to a computer
Use the following procedure to turn off the power of the VariOS. If you fail to use the correct
procedure to turn off the power, your computer may display a warning message.
In Windows Me, powering down the VariOS before unmounting the drive may
cause an error to occur in Windows. You must use the following procedure when
powering down.
1
If V-Producer is running, exit the program.
2
Unmount the VariOS drive that is mounted on your computer.
• Windows: (This is not necessary for Windows 98.)
In the task tray, double-click the eject icon. Then click the item that indicates the VariOS
drive (this will differ depending on your version of Windows; see below) to unmount the
drive.
fig.02-taskicon
• Macintosh:
Drag the VARIOS_DRV on the desktop into the “Trash”.
3
Turn off the power of the VariOS.
When you power down the VariOS, the entire contents of the VariOS drive
recognized by your computer will be deleted. If you have stored important data in
the VariOS drive, you must save the song in V-Producer (p. 91) before powering
down the VariOS, or save it to the flash ROM or PC card of the VariOS.
Windows XP, 2000 USB high-capacity storage device
Windows Me USB disk