User guide

Editing the sample parameters (Sample Edit)

■ Robot (robot voice switch)

Turn this ON if you want to remove the sense of pitch from the sample (i.e., to ignore the original pitch

of the sample and sound it at the pitch that you play). In the case of a phrase sample, you can use your

keyboard to play a melody that is entirely different than the original sample, in this way using a single

sample to play a variety of melodies.

Values: OFF, ON

Default value: OFF

* This setting is valid only for samples whose Encode Type (p. 57) is set to SOLO.

* If slight pitch changes in the original phrase are an important part of the performance expression, the

Robot Voice function may not produce satisfactory results. The results may also be unsatisfactory if the

key you play is far away from the pitch of the original phrase.

■ Reset

fig.03-08

If you press this button, the values you edited in Sample Edit will return to their default

settings. Try pressing this button if you have been editing the parameters and can no

longer hear any sound, or if you experience similar problems.