To resize thickness, move all items on the front cover and registration marks to left or right. ’05-3-1N V-Card: Owner’s Manual 03897845 Copyright © 2005 ROLAND CORPORATION All rights reserved. No part of this publication may be reproduced in any form without the written permission of ROLAND CORPORATION. Owner’s Manual The V-Synth XT comes with the VC-1 and VC-2 titles from Roland's “V-Card” software series preinstalled.
To resize thickness, move all items on the front cover and registration marks to left or right.
vc2_for_XT_e1 3 ページ 2005年3月8日 火曜日 午後4時52分
vc2_for_XT_e1 4 ページ 2005年3月8日 火曜日 午後4時52分 Table of Contents Main Features.......................................................................................................6 Conventions Used in This Manual .................................................................................................... 6 About the VC-2 .....................................................................................................7 Internal Structure ..........................................................
vc2_for_XT_e1 5 ページ 2005年3月8日 火曜日 午後4時52分 Table of Contents Wave Screen ........................................................................................................................................ 29 OSC............................................................................................................................................................. 29 VARI.................................................................................................................................
vc2_for_XT_e1 6 ページ 2005年3月8日 火曜日 午後4時52分 Main Features VC-2 “Vocal Designer” transforms the V-Synth XT into a cutting-edge vocal modeling processor. By playing a keyboard while you speak into the mic, you can create beautiful and clearly intelligible human choruses as well as many other vocal-type sounds with unprecedented quality.
vc2_for_XT_e1 7 ページ 2005年3月8日 火曜日 午後4時52分 About the VC-2 Internal Structure The VC-2 consists of a carrier section, a modulator section, a vocoder section, and an effects section. • The carrier section generates the signal (timbre and pitch) that is the basis of the sound. • The modulator section uses a mic input or wave to generate a signal from which the formant data (vocal character) is extracted.
vc2_for_XT_e1 8 ページ 2005年3月8日 火曜日 午後4時52分 About the VC-2 Patch Algorithms The VC-2 provides the following twelve patch algorithms. Each of these algorithms optimizes the values of certain parameters to make it easy for you to create a desired sound. Modeling group Keyboard group Keyboard Choir Instead of the mic input, samples will be used to generate the sound. You can add these samples. This creates the sound of a choir (multiple vocal).
vc2_for_XT_e1 9 ページ 2005年3月8日 火曜日 午後4時52分 About the VC-2 Memory Structure Project The largest unit of memory used by the VC-2 is the project. A project contains up to 448 patches, up to 127 waves, and various system settings. The VC-2 uses one project at a time. Work Area/Temporary Area When the VC-2 starts up, the project data is placed in temporary memory called the work area. The currently playable patch data is then further placed (from the work area) into a location called the temporary area.
vc2_for_XT_e1 10 ページ 2005年3月8日 火曜日 午後4時52分 Panel Descriptions Front Panel 2 1 14 3 8 4 9 10 15 13 11 5 6 16 12 17 7 1 INPUT Adjusts the volume of the signal input through the MIC jacks on the front panel. * This does not affect the rear panel INPUT jacks. POWER * This instrument is equipped with balanced (XLR/TRS) type jacks. Wiring diagrams for these jacks are shown below. Make connections after first checking the wiring diagrams of other equipment you intend to connect. fig.
vc2_for_XT_e1 11 ページ 2005年3月8日 火曜日 午後4時52分 Panel Descriptions * The MIC switch does not affect the rear panel INPUT jacks. * Always turn the phantom power off when connecting any device other than condenser microphones that require phantom power. You risk causing damage if you mistakenly supply phantom power to dynamic microphones, audio playback devices, or other devices that don’t require such power.
vc2_for_XT_e1 12 ページ 2005年3月8日 火曜日 午後4時52分 Panel Descriptions 13 Display 17 POWER Switch This displays information regarding the operation you are performing. 14 E1–E8 knobs These knobs control The Top Screen of Patch Mode (p. 16) parameters in real time. 15 PC CARD Slot A memory card can be inserted here. 16 VALUE Dial This is used to modify values. If you hold down [SHIFT] as you turn the VALUE dial, the value will change in greater increments. [MODE] Opens the Mode Menu window.
vc2_for_XT_e1 13 ページ 2005年3月8日 火曜日 午後4時52分 Panel Descriptions Rear Panel 1 2 1 AC Inlet Connect the included power cord to this inlet. 2 DIGITAL AUDIO INTERFACE Connector (OPTICAL IN/OUT, COAXIAL IN/OUT) 3 4 5 6 4 INPUT Jacks (L, R) An external audio source can be connected to these jacks for external input. If you’re playing a patch whose patch algorithm (p. 8) is Processor Type 1 or Processor Type 2, connect an external audio source (e.g.
vc2_for_XT_e1 14 ページ 2005年3月8日 火曜日 午後4時52分 Making connections In order to use the VC-2, you’ll need to connect a mic and MIDI keyboard to the V-Synth XT as shown in the illustration below. V-Synth XT (Front Panel) POWER Microphone MIC If you’re playing a patch whose patch algorithm is Process Type 1 or Process Type 2, connect an external audio source (e.g., keyboard or CD player) to the V-Synth XT’s “INPUT L” jack, and input an audio signal.
vc2_for_XT_e1 15 ページ 2005年3月8日 火曜日 午後4時52分 Starting up VC-2 1. Before turning on the V-Synth XT’s power, consider these two questions: * Are all peripheral devices connected correctly? * Have the volume controls of the V-Synth XT and all connected audio devices been turned to their lowest settings? 2. Turn on the POWER switch located on the front panel of the V-Synth XT. fig.Q-02.e ON OFF * When you turn on the power, the V-Card that was most recently started will start up. 3.
vc2_for_XT_e1 16 ページ 2005年3月8日 火曜日 午後4時52分 Try Out the Sound (Patch mode) The Top Screen of Patch Mode 1. Press [MODE]. The VC-2 MODE MENU window appears. 2. Touch . The top screen appears. Selecting a Patch Selecting Patches with the VALUE dial 1. Access the top screen of Patch mode. 2. Touch the patch number indication to highlight it. 3. Turn the VALUE dial or press [INC], [DEC]. You can switch more rapidly by holding down [SHIFT] while you perform these operations.
vc2_for_XT_e1 17 ページ 2005年3月8日 火曜日 午後4時52分 Try Out the Sound (Patch mode) : Change the buttons at both edges of the screen to Patch Algorithm. < << >: Return to the preceding screen page. < >> >: Advance to the next screen page. 4. Touch to select the patch. Using buttons to select patches Any of the 64 patches in the current patch bank can be selected by entering the patch bank and number using numeric keys [1]– [8] on the front panel (Patch Palette). 1.
vc2_for_XT_e1 18 ページ 2005年3月8日 火曜日 午後4時52分 Try Out the Sound (Patch mode) Parameters in the Top Screen If the patch algorithm is Modeling~ Parameter MIC Level Value 0–127 Carrier Level Carrier Release 0–127 Vocoder Formant Type Vocoder Level Vocoder Natural Voice T00– T15 Common to all patch algorithms Parameter Tempo Chord Memory Chord Memory Hold Value 20.0–250.0 ON, OFF ON, OFF Explanation Adjusts the tempo of the patch Switches the Multi Chord Memory (one-finger chord) function on/off.
vc2_for_XT_e1 19 ページ 2005年3月8日 火曜日 午後4時52分 Try Out the Sound (Patch mode) If the patch algorithm is Keyboard~ Parameter Wave Level Value 0–127 Carrier Level Carrier Release 0–127 Vocoder Formant Type Vocoder Level Vocoder Natural Voice T00– T15 0–127 Explanation Adjusts the output level of the wave to the vocoder. Adjusts the output level of the carrier to the vocoder. Adjusts the release time of the carrier (the time from when you release a key until the sound disappears).
vc2_for_XT_e1 20 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) Creating Patches On the VC-2, you don’t need to create patches from scratch, you can start with an existing patch; i.e., by selecting a patch algorithm. 1. Decide on the algorithm (p. 8) for the patch you want to create. 2. Choose an existing patch that uses that algorithm. 3. Assign a new name to that patch, and save it at a different patch number (p. 22). 4. Edit the patch you copied.
vc2_for_XT_e1 21 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) possible loss of sound data or system settings. Equal Temperament This tuning divides the octave into 12 equal parts, and is the most widely used method of temperament used in Western music. The VC-2 employs equal temperament when the Scale Tune Switch is set to “OFF.” To transmit data to an external MIDI device, connect the external MIDI device and V-Synth XT as shown in the diagram. fig.08-01.
vc2_for_XT_e1 22 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) 4. Set the external MIDI device so that it will be ready to receive data, and touch to execute data transmission. While the data is being transmitted, the display will indicate “Transmitting...” When “COMPLETED!” is displayed, the transmission has been completed. Saving Patches (PATCH Write) Changes you make to sound settings are temporary, and will be lost if you turn off the power or select another sound.
vc2_for_XT_e1 23 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) 2. Touch to turn it on. Now you can play the patch that is in the currently selected save destination. 3. Play the save-destination patch to make sure that it’s one you don’t mind overwriting. The patch auditioned using the Compare function may sound slightly different than when it is played normally. 4. If you wish to change the save destination, respecify the save-destination patch by using the VALUE dial. 5.
vc2_for_XT_e1 24 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) Selecting a Patch from a List (PATCH List) Patches whose patch algorithm is Keyboard~ do not have this screen. Switching the Mic Setting You can also access the PATCH List window from the top screen of Patch mode by touching the patch algorithm in the upper left of the screen. The VC-2 can store eight mic settings.
vc2_for_XT_e1 25 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) 4. When you have finished inputting, touch to finalize the mic setting name. Parameter EQ HIGH PRE-EFX Type (Pre-Effect Types) Freq Gain Value 2000, 4000, 5000, 6300, 8000, 10000, 12500, 16000, 20000 Hz -15– +15 dB There are three pre-effects: compressor, limiter, and noise suppressor. By using these you can adjust the level of the sound being sampled.
vc2_for_XT_e1 26 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) For the parameters of the noise supressor, refer to the explanation of NS-COMP. LIMITER Parameter Thres (Threshold Level) Attack (Attack Time) Value -40– 0 dB Explanation Specifies the level (threshold level) at which the limiter will begin to function. 0–127 Release (Release Time) Ratio 0–127 Specifies the time from when the input level exceeds the threshold level until the limiter begins to operate.
vc2_for_XT_e1 27 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) PITCH EQ GROWL OSC1 PITCH EQUALIZER Parameter OctShift (Octave Shift) Value -4– +4 Explanation Adjusts the pitch of the OSC1’s sound up or down in units of an octave (+/-4 octaves). Mid 1/Mid 2 Parameter Freq OSC2 PITCH Parameter Coarse (Coarse Tune) Fine (Fine Tune) PitchKF (Pitch Key Follow) Value -48– +48 Explanation Adjusts the pitch of the oscillator up or down in semitone steps (+/-4 octaves).
vc2_for_XT_e1 28 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) Parameter VeloSens LevelModDepth Value -63– +63 -63– +63 Explanation Keyboard playing dynamics can be used to control the volume of the patch. If you want the volume to have more effect for strongly played notes, set this parameter to a positive (+) value. If you want the volume to have less effect for strongly played notes, set this to a negative (-) value.
vc2_for_XT_e1 29 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) Parameter Time Value 0–127 Explanation When portamento is used, this specifies the time over which the pitch will change. Higher settings will cause the pitch change to the next note to take more time. BENDER Parameter Range Value 0–48 Explanation Specifies the degree of pitch change in semitones when the Pitch Bend lever is all the way left/right.
vc2_for_XT_e1 30 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) Formant Vocoder Screen You can go to the top screen by touching in the lower part of the screen. Patches whose patch algorithm is Poly PShift do not have this screen. VOCODER Parameter Level Atk Value 0–127 Explanation Adjusts the output level of the vocoder. 0–100 Adjusts the attack time of the vocoder. * This parameter is not available if the patch algorithm is Vocoder~ or Processor Type 2.
vc2_for_XT_e1 31 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) Parameter FmtKF Value -200– +200 OSC 2 switch OFF, ON Explanation Specifies the amount by which the formant value will be affected by the key you play. Switches OSC2 on/off. POLY PITCH SHIFTER Parameter Level Value 0–127 ModDepth -63– +63 Explanation Adjusts the output level of the poly pitch shifter. Adjust the output level of the poly pitch shifter using the controller assigned by Controller (p. 31).
vc2_for_XT_e1 32 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) CHO Type (Chorus Type) Effect Screen You can go to the top screen by touching in the lower part of the screen. MFX (MFX On/Off Switch) Switches MFX on and off. (OFF), Value: 00 (Off)–08 CHO Master Level (Chorus Master Level) Routing Value: Use this parameter to select from among the 8 available chorus. For details on chorus parameters, refer to “Chorus Parameters” (p. 61).
vc2_for_XT_e1 33 ページ 2005年3月8日 火曜日 午後4時52分 Creating/Editing Patches (Patch mode) MFX REV MFX Type REV Type (Reverb Type) Use this parameter to select from among the 41 available MFX. For details on MFX parameters, refer to “MFX Parameters” (p. 43). Use this parameter to select from among the 14 available reverb. For details on reverb parameters, refer to “Reverb Parameters” (p. 62).
vc2_for_XT_e1 34 ページ 2005年3月8日 火曜日 午後4時52分 Using Waves (Wave Mode) 5. From the file list, select the file/folder that you want to import. Never turn off the power of the V-Synth XT while performing an operation in Wave mode. Doing so may destroy the files. 1. Press [MODE]. The VC-2 MODE MENU window appears. 2. Touch . The Wave screen appears. Here you can use the following functions. Touch the appropriate button to execute. Prevw: Preview (audition) the selected file (.wav/.aif).
vc2_for_XT_e1 35 ページ 2005年3月8日 火曜日 午後4時52分 Using Waves (Wave Mode) Using the Wave Browser You can view a list of the imported waves in the work area. Here you can use the following functions. Touch the appropriate button to execute. Top: Move to the beginning of the list. End: Move to the end of the list. Info: View information for the selected file. Prevw: Preview (audition) the selected file (.wav/.aif). Search Empty: Move to the first vacant wave. Copying a Wave (WAVE Copy) 1.
vc2_for_XT_e1 36 ページ 2005年3月8日 火曜日 午後4時52分 Settings Common to All Modes (System Mode) Settings that affect the entire operating environment of the VC-2, such as tuning and MIDI message reception, are referred to as system functions. This section explains how to make settings for the System functions and describes the functions of the different System parameters. How to Make the System Function Settings 1. Press [MODE]. The VC-2 MODE MENU window appears. 2. Touch .
vc2_for_XT_e1 37 ページ 2005年3月8日 火曜日 午後4時52分 Settings Common to All Modes (System Mode) IO Viewing VC-2’s Information (Information) Parameter USB Input Type 1. Touch <▼MENU> in the upper right of the screen. A pulldown menu appears. 2. In the pulldown menu, touch . Value Explanation The signal that is input from the computer via USB audio is used as the modulator (mic) or as the carrier for Processor Type 1 or 2.
vc2_for_XT_e1 38 ページ 2005年3月8日 火曜日 午後4時52分 Settings Common to All Modes (System Mode) EQ Parameter Parameter 2 Band EQ Value OFF, ON LOW Freq 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1000, 1250, 1600, 2000, 2500, 3150, 4000 Hz -15– +15 dB LOW Gain HIGH Freq HIGH Gain TOTAL Gain 2000, 4000, 5000, 6300, 8000, 10000, 12500, 16000, 20000 Hz -15– +15 dB -15– +15 dB Explanation Switch the 2-Band equalizer on/off. Selects the frequency of the low range.
vc2_for_XT_e1 39 ページ 2005年3月8日 火曜日 午後4時52分 Settings Common to All Modes (System Mode) Value — Explanation Store the chord you specified from the keyboard into the chord set. Parameter Value Explanation USB Audio OUT USB Audio IN Parameter MIC Jack Switch Value OFF, ON INPUT Jack Switch OFF, ON INPUT Jack Gain 0db, +12db Explanation Specifies whether the front panel MIC jack will be enabled (ON) or disabled (OFF).
vc2_for_XT_e1 40 ページ 2005年3月8日 火曜日 午後4時52分 Saving and Loading Projects (Disk Mode) Never turn off the power of the V-Synth XT while performing an operation in Disk mode. Doing so may destroy the files. Saving a Project on Disk (Save Project) Save the project in the work area to internal memory / PC Card. 1. Press [MODE]. The VC-2 MODE MENU window appears. 2. Touch . The DISK UTILITY MENU window appears. 3. Touch . The Disk Save Project screen appears. 4.
vc2_for_XT_e1 41 ページ 2005年3月8日 火曜日 午後4時52分 Reset to Default Factory Settings (Factory Reset) This restores all VC-2 data in the internal memory to the factory-set condition (Factory Reset). If there is important data you’ve created that’s stored in the internal memory, all such data is discarded when a Factory Reset is performed. If you want to keep the existing data, USB backing up onto a computer (p. 42) or transmit it to an external MIDI device and save it (p. 21). 1. Press [MODE].
vc2_for_XT_e1 42 ページ 2005年3月8日 火曜日 午後4時52分 Backing Up Data to Your Computer (USB Mode) By connecting the V-Synth XT with your computer via a USB cable, you can transfer files such as projects, patches, and wave data from internal memory or a memory card to and from the hard disk or other media of your computer, in order to back up your data. You can copy waves from your computer to the VC-2, or back up VC-2 projects to your computer.
vc2_for_XT_e1 43 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Page MFX Parameters MFX (Multi-Effects) provides 41 types of effect. This section explains the features of each MFX, and the functions of the parameters. Explanations for each MFX Type are given on the following pages. Page 01: Parametric EQ p.
vc2_for_XT_e1 44 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 03: Resonant Filter It allows for cyclical control of the cutoff frequency using an LFO. It allows you to make drastic changes in the frequency response of the input signal by the cutoff frequency and feedback, making the sound brighter or darker, or giving it a distinctive character.
vc2_for_XT_e1 45 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 05: Distortion / OD (Distortion / Overdrive) Overdrive produces a natural-sounding distortion similar to that produced by a vacuum tube amplifier. Distortion produces a more intense distortion than the overdrive effect.
vc2_for_XT_e1 46 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Type MIDDLE JC-120 BUILT IN 1 BUILT IN 2 BUILT IN 3 BUILT IN 4 BUILT IN 5 BG STACK 1 BG STACK 2 MS STACK 1 MS STACK 2 METAL STACK Cabinet open back enclosure open back enclosure open back enclosure open back enclosure open back enclosure open back enclosure open back enclosure sealed enclosure large sealed enclosure large sealed enclosure large sealed enclosure large double stack Speaker 12 x 1 12 x 2 12 x 2 12 x 2 12 x 2 12 x 2 12 x 2 12 x 2 12 x
vc2_for_XT_e1 47 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 09: Dynamic Processor (Stereo Dynamic Processor) A comp/limiter, enhancer, 3-band equalizer, and noise suppressor are connected in series. Comp/Limiter is able to use as a compressor, which controls inconsistencies in sound levels by suppressing high sound levels while lifting weaker signals, or as a limiter that prevents the signal from reaching exceedingly high levels.
vc2_for_XT_e1 48 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Delay Time L-R Shift L-R Order Value 0–1300 ms (MONO), 0–650 ms (STEREO, ALTERNATE), note 0–650 ms, note L→R, R→L Feedback -98– +98 % Low Damp Freq 50–4000 Hz Description Adjusts the delay time from the direct sound until the delay sound is heard. Of the left and right delay sounds, the delay time will be increased for only one side. If the L-R order is L→R, the R sound will be later.
vc2_for_XT_e1 49 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 13: Reverse Delay Parameter Adds the reverse of the input sound as the delay sound.
vc2_for_XT_e1 50 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Balance Value DRY100:0WET– DRY0:100WET Description Volume balance between the direct sound (DRY) and the delay sound (WET) 17: Digital Chorus This is a stereo chorus or flanger. Equalizers are provided before (Pre) and after (Post) the chorus (or flanger).
vc2_for_XT_e1 51 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 18: Space Chorus 20: Analog Flanger This effect reproduces the sound of Roland’s SDD-320 spatial expression effects. Greater breadth is added. This effect reproduces the sound of Roland’s SBF-325 analog flanger. You can get three different types of flanger sounds (adding a metallic swelling sound to the source sound) and chorus like effect.
vc2_for_XT_e1 52 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Phase Value 0–180 deg Feedback Mode NORMAL, CROSS Feedback -98– +98 % Cross Mix Level -100– +100 Ps Low Freq Ps Low Gain Ps Hi Freq Ps Hi Gain 50–4000 Hz -15– +15 dB 2000–20000 Hz -15– +15 dB Description Specifies the spaciousness of the flanger sound. Specifies the input destination to which the flanger sound will be returned.
vc2_for_XT_e1 53 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 24: Digital Phaser Phaser is an effect that adds a phase-shifted sound to the original sound to create time-varying change, modulating the sound. Parameter Shift Mode Value 4STAGE, 8STAGE Level Description Sets the number of stages in the phase shift circuit (four (4STAGE) or eight (8STAGE)). Setting this to eight stages (8STAGE) increases the number of the frequency points that sound is canceled, giving a sharper effect. 8 stage Freq.
vc2_for_XT_e1 54 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Balance Value DRY100:0WET– DRY0:100WET Ps Low Freq Ps Low Gain Ps Hi Freq Ps Hi Gain 50–4000 Hz -15– +15 dB 2000–20000 Hz -15– +15 dB Description Volume balance between the direct sound (DRY) and the effect sound (WET) Frequency of the low range Gain of the low range Frequency of the high range Gain of the high range 27: Stereo Pitch Shifter This effect features two pitch shifters arranged in parallel, making it stereo compatible.
vc2_for_XT_e1 55 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 29: OD/DS→Delay (Overdrive/Distortion→Delay) This effect connects either Overdrive or Distortion and Delay in series.
vc2_for_XT_e1 56 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 31: Enh→Cho/Flg (Enhancer→Chorus/Flanger) This effect connects Enhancer and either Chorus or Flanger in series. Parameter Enhan Sens Enhan Frequency Value 0–127 0–127 Enhan Mix Level Enhan Level Mod Mode 0–127 Mod Depth 0–127 CHORUS, FLANGER 0.05–10.0 Hz, note 0–127 Mod Phase 0–180 deg Mod Pre Delay 0–50.
vc2_for_XT_e1 57 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Enhan Sens Enhan Frequency Value 0–127 0–127 Enhan Mix Level Enhan Level EQ Low Freq EQ Low Gain EQ Mid Freq EQ Mid Q 0–127 EQ Mid Gain EQ Hi Freq EQ Hi Gain Delay Time -15– +15 dB 2000–20000 Hz -15– +15 dB 0–1300 ms, note Delay Feedback Low Damp Freq Low Damp Gain Hi Damp Freq Hi Damp Gain Delay Level 0–127 50–4000 Hz -15– +15 dB 50–20000 Hz 0.5, 0.7, 1.0, 2.0, 4.0, 8.
vc2_for_XT_e1 58 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 35: Bass Multi Parameter Bass Multi provides Comp/Limiter, Overdrive or Distortion, 3-band equalizer, and Chorus or Flanger effects connected in series. This algorithm is a multi-effects for bass. Parameter Comp Sw Comp Threshold Comp Attack Value OFF, ON -60–0 dB Comp Release 0–127 Comp Ratio Comp Gain Od/Ds Sw 1.
vc2_for_XT_e1 59 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Mod Level Value 0–127 Trem/Pan Sw Trem Mode OFF, ON Trem Waveform TREMOLO, AUTO PAN TRI, SAWUP, SAWDN, SQR, SIN Description Volume of the chorus or flanger sound. Turns the tremolo/auto pan effect on/off. Selects whether to use tremolo or auto pan. Selects the type of modulation. TRI: Triangle wave SAWUP/SAWDN: Sawtooth Wave SQR: Square wave SIN: Sine wave SAWUP SAWDN Trem Rate 0.05–10.
vc2_for_XT_e1 60 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Parameter Total Noise Scratch Dust Hiss Value 0–127 0–127 0–127 0–127 Total Wow/ Flutter Wow 0–127 Flutter 0–127 Random 0–127 Balance 0–127 DRY100:0WET– DRY0:100WET Description Total noise level. Scratches on the record. Dust on the record. Continuous hissing noise. These settings add the typical record’s noise. The noises increase as the values are raised.
vc2_for_XT_e1 61 ページ 2005年3月8日 火曜日 午後4時52分 Effects List Chorus Parameters Chorus Parameters Parameter Pre Low Freq The functions of Chorus parameters are explained. Pre Hi Freq Chorus Type 01: Chorus 1 Pre Dly Time Value 500–15000 Hz, THRU THRU, 50–800 Hz 0–50.0 ms Co LPF Freq 500–15000 Hz, THRU Co HPF Freq THRU, 50–800 Hz Rate Depth 0.05–10.0 Hz, note 0–127 Feedback -98– +98 % Cho/Flg Sw CHORUS, FLANGER This conventional chorus effect adds spaciousness and depth to the sound.
vc2_for_XT_e1 62 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 02: Stereo OperaHouse Reverb Parameters The functions of Reverb parameters are explained. Explanations for each Reverb Type are given on the following pages. Stereo reverb which simulates the reverberation within a opera house. Parameter Pre Low Freq Pre Low Gain Pre Mid Freq Pre Mid Q Value 50–4000 Hz -15– +15 dB 50–20000 Hz 0.5, 0.7, 1.0, 2.0, 4.0, 8.
vc2_for_XT_e1 63 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 04: Stereo Echoes 06: Stereo Cathedral Stereo reverb which simulates echoes. Stereo reverb which simulates the reverberation within a cathedral. Parameter Pre Low Freq Pre Low Gain Pre Mid Freq Pre Mid Q Value 50–4000 Hz -15– +15 dB 50–20000 Hz 0.5, 0.7, 1.0, 2.0, 4.0, 8.0 Pre Mid Gain Pre Hi Freq Pre Hi Gain Pre Delay -15– +15 dB 2000–20000 Hz -15– +15 dB 0–500 ms Repeat Time Rev Time LfDamp Gain 20–500 ms 0.06–10.
vc2_for_XT_e1 64 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 08: Room 1 09: Room 2 Reverb which simulates the reverberation within a room. It is standard room reverb. This simulates the reverberation of a room. It is suitable for simulating a fairly small room, and produces a clear reverberation. Parameter Pre Low Freq Pre Low Gain Pre Mid Freq Pre Mid Q Value 50–4000 Hz -15– +15 dB 50–20000 Hz 0.5, 0.7, 1.0, 2.0, 4.0, 8.
vc2_for_XT_e1 65 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 10: Room 3 11: Hall 1 Reverb which simulates the reverberation within a room. This is suitable for simulating a fairly large room, and produces reverberation with a strong mid and low range. This simulates the reverberation of a concert hall. It is a conventional hall reverb. You can also apply a chorus effect to the reverberation to adjust the sense of spaciousness or to create a special effect.
vc2_for_XT_e1 66 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 12: Hall 2 13: Hall 3 Simulates the reverberation in a concert hall. This is suitable for simulating a smaller room, and produces a clear reverberation. Simulates the reverberation in a concert hall. This is suitable for simulating a fairly large room, and produces reverberation with a strong mid and low range. Parameter Pre Low Freq Pre Low Gain Pre Mid Freq Pre Mid Q Value 50–4000 Hz -15– +15 dB 50–20000 Hz 0.5, 0.7, 1.0, 2.0, 4.0, 8.
vc2_for_XT_e1 67 ページ 2005年3月8日 火曜日 午後4時52分 Effects List 14: Garage This simulates the reverberation of a garage. It produces the reverberation of a room surrounded by hard-surfaced walls with many reflections. Parameter Pre Low Freq Pre Low Gain Pre Mid Freq Pre Mid Q Value 50–4000 Hz -15– +15 dB 50–20000 Hz 0.5, 0.7, 1.0, 2.0, 4.0, 8.0 Pre Mid Gain Pre Hi Freq Pre Hi Gain Rev Time Pre Dly Time -15– +15 dB 2000–20000 Hz -15– +15 dB 0.06–32.0 sec 0–200.
vc2_for_XT_e1 68 ページ 2005年3月8日 火曜日 午後4時52分 Specifications VC-2: V-Card Vocal Designer Internal (User) Memory • Patches: 448 Main Functions • Transform vocal input from a mic into high-quality choirs and human choruses • Use the keyboard to play chords and control the pitch in real time Preset Memory • Patches: 64 • Transform the character of your voice in real time Supported hardware configurations • Play high-quality vocal choirs from your keyboard A mic for input, an external MIDI keyboard, etc.
vc2_for_XT_e1 69 ページ 2005年3月8日 火曜日 午後4時52分 MIDI Implementation [Vocal Designer] Model VC-2 for V-Synth XT Date: March 1, 2005 Version: 1.00 MIDI Implementation Chart Transmitted Function...
vc2_for_XT_e1 70 ページ 2005年3月8日 火曜日 午後4時52分 Index A F .................................................................... 13 .................................................................. 8 Attack ...................................................................... 28 Audio I/F ................................................................. 38 AutoNoteSw ........................................................ 30–31 ............................................................. 41 .............
vc2_for_XT_e1 71 ページ 2005年3月8日 火曜日 午後4時52分 Index .......................................................... 38 ................................................................ 24 MIC Setting Name ....................................................... 24 MIC Switch ............................................................... 10 [MIDI] ...................................................................... 11 MIDI connector ........................................................... 13 MIDI Indicator ..
vc2_for_XT_e1 72 ページ 2005年3月8日 火曜日 午後4時52分