Owner's manual

23
Changing the Tones
Track type: Drum Kit
This changes the drum kit and drum instruments.
DRUM KIT
1. Follow the steps in “Selecting a Clip” (p. 19) to select the
clip with the tone you want to change.
2. Press the [VALUE] dial.
The BROWSER screen appears.
3. Use the [VALUE] dial to select the load source for the drum
kit, and then press the [VALUE] dial.
4. Use the [VALUE] dial to select the drum kit.
Load source Operation
PRESET
Select either “All Number” or “All Alphabet,” and then select a drum kit.
5 Select “All Number” for the category. The drum kit names are
displayed in numerical order. Select “All Alphabet” to show the
names in alphabetical order.
5 When you change the pads to Note mode, you can press the pads
to hear a preview of the drum kit.
PROJECT Select a project and then select a clip that uses a drum kit.
SOUND FILE
Select an SDZ/SVZ le to display the drum kit list. Select a drum kit
from the list.
5 Folders are shown with the “F:” prex.
5. Press the [VALUE] dial.
The drum kit is changed.
MEMO
You can change all of the drum kits for all clips on the same track at once.
Press the [EDIT] button in step 2, and then press the [KICK]–[INST 2] buttons.
If “Copy Sound All?” is shown in step 5, use the [VALUE] dial to select “OK,” and
then press the [VALUE] dial.
Drum instrument
1. Follow the steps in “Selecting a Clip” (p. 19) to select the
clip with the tone you want to change.
2. Press the [NOTE] button to switch the pads to Note mode.
3. Press pads [1]–[16] to select the drum instrument you want
to modify.
4. Press the [VALUE] dial.
The BROWSER screen appears.
5. Use the [VALUE] dial to select the load source for the drum
instrument, and then press the [VALUE] dial.
6. Use the [VALUE] dial to select the drum instrument.
Load source Operation
PRESET
Select a category and then select the drum instrument.
5 Select “All Number” to display the drum instrument names in
numerical order. Select “All Alphabet” to show the names in
alphabetical order.
5 Press a pad to preview its drum instrument.
PROJECT Select a project and then select a clip that uses a drum instrument.
WAVE FILE
Select a sample le.
Selecting a preset le (.svz) displays the sample list. Select a sample
from the list.
5 Folders are shown with the “F:” prex.
5 Press the [LOAD] button to preview the sample le.
7. Press the [VALUE] dial.
The drum instrument is changed.