Owner's manual

30
Recording CTRL Knob Movement in Steps (Motions)
Creating a Linear Motion (Motion Designer)
Use the Motion Designer to automatically create and record linear
motions that change over time.
This function is convenient for creating eects such as ducking (side
chain).
* Motions previously recorded are overwritten.
1. Follow the steps in “Selecting a Clip” (p. 19) to select the
clip to which you want to record the motion.
2. Press the [EDIT] button, and then press the [MOTION] button.
The MOTION MENU screen appears.
3. Use the [VALUE] dial to select “MOTION DESIGNER,” and then
press the [VALUE] dial.
The MOTION DESIGNER screen appears.
4. Use the [VALUE] dial to select a parameter, and edit the value.
Parameter Explanation
FORM TYPE Selects a waveform that varies over time.
STEP LEN Species the number of steps from the motion’s beginning to end.
MIN VALUE Species the minimum value of the waveform.
MAX VALUE Species the maximum value of the waveform.
DEST KNOB Species the CTRL knob for which the motion is recorded.
5. Use the [VALUE] dial to select “>>EXEC,” and then press the
[VALUE] dial.
The motion that was created starts recording again from the
beginning of the step.
6. Press the [EXIT] button to nish.