Owner`s manual

Getting Started

To Adjust the Brightness of the Display

You may wish to adjust the brightness of the display immediately after

power-up, under unusual viewing conditions, or after the unit has been on

for an extended period of time. Adjust the brightness of the screen using the

[CONTRAST] knob on the left bottom of the display.

fig.008

If You’re Confused About What’s Being

Displayed or What’s Going On

If you become confused about what you’re seeing on the display, or have

lost your way during some procedure, press [LEVEL METER]. The display

returns to the screen shown immediately after power-up. You can try the

procedure you have been working on again from the beginning.

fig.201

If you find that your system functions differently than described in the

QUICK START or the Owner’s Manual, read “Troubleshooting” (Owner’s

Manual: p.261) for further information.

If the above steps do not resolve your problem, contact a nearby Roland

Service Center or an authorized Roland distributor, or the shop where you

made your purchase.

LEVEL METER