Owner`s manual

14
Getting Started
Setting the Internal Clock
The mixing console unit contains an internal clock. When you store a
Project, the current time, day, and month information is automatically
stamped into the Project (Time Stamp). This makes the management of
Projects easier, since you can sort them in day/time order. When you turn
on the power for the first time after purchase, be sure to set your system’s
date and time by following the instructions below.
fig.101
1
Hold down [SHIFT] and press [PROJECT].
2
Press CURSOR [UP] to move the cursor to the upper field.
5672
15 6 3 4