Owner`s manual
15
Getting Started
3
Press [F5](DATE).
The “SYS DATE” display appears.
fig.202
4
Press CURSOR [DOWN] to move the cursor to the “ADJUST
DATE / ADJUST TIME” field.
5
Set the current date. Turn [V1](YEAR), [V2](MONTH),
[V3](DATE) to select the current date, and then press [F1](SET)
to confirm your selection.
6
Set the current time. Turn [V4](HOUR), [V5](MIN), [V6](SEC)
to select the current time, and then press [F4](SET) to confirm.
The time you set becomes effective immediately.
The date and time are set.
• To return to the original display (the “LEVEL METER” display),
press [LEVEL METER].
The console contains a lithium battery that allows the system to retain
the internal clock settings and certain other parameter values. When
the battery becomes weak, malfunctions may occur – the system clock
may not function correctly, or the unit may not properly recall your last
settings at power-up. If such things occur, restart the mixing console.
If a message indicating low battery power appears, change the battery
(Owner’s Manual “How to replace the battery” p.26), and restore the
original factory settings (QUICK START: p.13).
You can set the time on/off
on the display, and select
from various date display
formats (
Owner’s Manual
“Adjusting internal clock”
p.25).