Owner`s manual
40
Using Sub Outputs
Signals can be sent from the system’s MAIN OUT to a mixdown recorder or
a stage speaker system. They can also be sent to other destinations, such as
studio monitors, or even to individual tracks of a multi-track recorder.
Setting Up Monitor Sends for Studio or
Stage
The system’s ASSIGNABLE OUTs (Owner’s Manual “Routing Signals to MULTI
OUTs and ASSIGNABLE OUT Jacks” p.93)
1-4 can send signals to monitors for
a performer in another room –perhaps a studio – or on a stage. You can
easily set up two such independent stereo monitoring systems: “STUDIO 1”
and “STUDIO 2”. ASSIGNABLE OUTs 1 and 2 can be used as L and R
outputs to “STUDIO 1”, and ASSIGNABLE OUTs 3 and 4 as L and R outputs
to “STUDIO 2”.
Connect a stereo headphone or monitor speaker amplifier to the STUDIO
output jacks.
Each monitor mix can be tailored to the needs of the performer listening to
it. “STUDIO 1” has a dedicated level knob. This makes “STUDIO 1” handy
for the monitoring of vocals on a stage – you can use this knob to quickly
lower the “STUDIO 1” volume if the undesirable howling occurs.
To Select Signals for Studio Monitors
fig.115
Owner’s Manual “Setting
Up Monitor Sends For
Studio Or Stage (STUDIO 1
or 2)” (p.95)
432
1
STUDIO 1
level knob