Owner`s manual

Using Sub Outputs

To Talk to Someone on a Stage or out in a Studio

(Talkback)

The Talkback feature allows you to talk to a performer or assistant on a stage

or in a studio by speaking into the Talkback microphone built into the

console. This microphone can be routed to a monitor speaker or other

monitoring device.

fig.116

Set [INPUT SELECT] to MIC 1.

Before switching the [INPUT SELECT], turn [MIC LEVEL] to turn the mic

level to 0.

Hold down [TALKBACK/SLATE] while speaking into the

microphone. Your voice is sent to the Main out and/or the Cue

bus. The Talkback/Slate is normally active only when the

button is held down (it lights in red).

To change the Talkback microphone’s volume, turn [MIC LEVEL].

To prevent howling, be sure to lower the volume of the monitor

speakers first when using the Talkback function.

Owner’s Manual “Talkback

and Slate to Player” (p.100)

11,2

MIC

You can also send your

voice to various other

destinations, such as the

ASSIGNABLE OUTs or

Flex Busses.