Owner`s manual

5
Getting Started
Installing the VM-C7100/C7200 Digital
Mixing System
The VM-C7100/C7200 Digital Mixing System consists of two units – the
mixing console and the mixing processor.
About the VM-C7100/C7200 Digital Mixing System
The Mixing Console
fig.001
All mixing activities take place on the mixing console, including the
adjusting of faders, the assignment of signals to busses and the application
of effects.
Place the console in an area such as a control room. Then, connect your
monitors, audio equipment, stereo mastering recorders and headphones to
the corresponding jacks on the console.
The Mixing Processor
fig.002
The mixing processor supplies the majority of the system’s input and output
jacks.
Place the processor at a convenient location near your performers, such as
in a studio or on a stage. Next, connect instruments, microphones,
amplifiers, multi-track recorders, effects processors, and monitors for the
performers to the corresponding mixing processor jacks.
Owner’s Manual “Names
of Things and What They
Do” (p.11)
You may attach an optional
wooden panel and a level
meter bridge (sold
separately) to the console.
OWNER’S MANUAL for
the Processor
Up to 2 processors can be
connected to each console,
which enables you to
achieve 94 input channels
(Owner’s Manual “Settings
related to cascade
connection” p.41,
OWNER’S MANUAL for
the Processor “Connecting
Two Processors (Cascade
Connection)” p.32 ).