Owner`s manual
88
Connection Samples
Here are some examples that might be helpful when connecting your equipments.
Connection Samples Using the TASCAM DA Series
48 Track Recording System (TASCAM DA-88 x 6)
• This is a 48 Track Recording System with six TASCAM DA Series recorders in use.
• You can record to individual tracks on 42 analog channels + 4 digital channels at once.
• You can mix 42 analog channels + 4 digital channels + 48 tape channels at once.
• You can control the recorder’s Transport and the tracks’ REC switch on the VM mixing console.
• You can memorize 100 Location points, and also search a Location by entering Time Codes.
• You can sync Automix with the tape.
• You can also connect the sequencer to the MIDI THRU on the ”LEVEL METER”.
• Turn the power on in the [DA Series]–[VM Series] order.
• 50 Scenes can be stored per Project (because of cascade connection).
• To run the secuencer in sync with the MIDI CLOCK, connect it to the MIDI THRU on the ”LEVEL METER”.
• Connect the SYNC cable to DIF-AT connected MULTI 1-8 on the Master processor.
• The VM-7000 Series cannot be used as the Word Clock Master.
DIF-AT DIF-AT DIF-AT
DA-88 DA-88 DA-88
SEQUENCER/PC
DIF-AT DIF-AT DIF-AT
DA-88 DA-88 DA-88
SYNC
IN
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
TDIF-1
SYNC
VM-LINK
R-BUS(RMDBII)R-BUS(RMDBII) R-BUS(RMDBII) R-BUS(RMDBII) R-BUS(RMDBII) R-BUS(RMDBII)
MULTI 1-8
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
MULTI 9-16
MULTI 17-24
MULTI 1-8 MULTI 9-16
MULTI 17-24
SYNC
OUT
SYNC
IN
SYNC
OUT
SYNC
IN
SYNC
IN
SYNC
OUT
SYNC
IN
SYNC
OUT
SYNC
IN
SYNC
OUT
MIDI
OUT
MIDI
IN
MIDI
OUT
MIDI
IN
ANALOG
2 INPUTS
ANALOG
20 INPUTS
+
DIGITAL
2 INPUTS
Processor
VM-7200
Processor
VM-7200
Console
VM-C7100/C7200
I/O Expansion Board
VM-24E
I/O Expansion Board
VM-24E
Cascade Kit
VM-24C
(SLAVE)
Cascade Kit
VM-24C
(MASTER)
Level Meter Bridge MB-24