To resize thickness, move all items on the front cover and center registration marks to left or right Owner’s Manual Thank you, and congratulations on your choice of the Roland Performance Keyboard VR-760. 201b Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (Owner’s manual p. 2), “USING THE UNIT SAFELY” (Owner’s manual p. 3), and “IMPORTANT NOTES” (Owner’s manual p. 5). These sections provide important information concerning the proper operation of the unit.
To resize thickness, move all items on the front cover and center registration marks to left or right. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
USING THE UNIT SAFELY The symbol alerts the user to important instructions or warnings.The specific meaning of the symbol is determined by the design contained within the triangle. In the case of the symbol at left, it is used for general cautions, warnings, or alerts to danger. Used for instructions intended to alert the user to the risk of death or severe injury should the unit be used improperly.
012a: • Immediately turn the power off, remove the power cord from the outlet, and request servicing by your retailer, the nearest Roland Service Center, or an authorized Roland distributor, as listed on the “Information” page when: • The power-supply cord, or the plug has been damaged; or • If smoke or unusual odor occurs • Objects have fallen into, or liquid has been spilled onto the unit; or • The unit has been exposed to rain (or otherwise has become wet); or • The unit does not appear to operate norma
IMPORTANT NOTES 291b In addition to the items listed under “IMPORTANT SAFETY INSTRUCTIONS” and “USING THE UNIT SAFELY” on pages 2 and 3, please read and observe the following: Power Supply 301 • Do not use this unit on the same power circuit with any device that will generate line noise (such as an electric motor or variable lighting system). 307 • Before connecting this unit to other devices, turn off the power to all units.
2. Insert the memory card into the memory card slot. Before Using Cards Using DATA Cards 3. Use the screws to fasten the card protector as shown below. Card protector • The VR-760’s memory card slot accepts CompactFlash memory cards. Microdrive storage media by IBM are not compatible. Inverted • CompactFlash and are trademarks of SanDisk Corporation and licensed by CompactFlash association. • Roland Corporation is an authorized licensee of the CompactFlash TM and CF logo trademarks.
Main Features Emphasis on Basic Keyboard Functions for Stage Use ■ Handles Organ, Piano, and Synthesizer Parts The VR-760 is a 76-key portable keyboard that integrates extremely high-quality “organ,” “piano,” and “synthesizer” sounds, so important for bands who need to cover organ, piano, and synthesizer parts, all in one unit. The sections for controlling these three instruments, arranged on the VR-760’s panel in an easy-to-understand layout, can all be used simultaneously.
Contents USING THE UNIT SAFELY...................................................................................................................... 3 IMPORTANT NOTES................................................................................................................................ 5 Main Features..........................................................................................7 Panel Descriptions................................................................................
Basic Operation of the Organ Part.......................................................................................... 33 The “Harmonic Bars” That Change the Composition of the Organ Tone............................ 33 [H-Bar Manual] button................................................................................................................. 35 Organ Section ...........................................................................................................................
MIDI Settings that Act on the VR-760 Globally (SYSTEM MIDI)............................................ 67 Connecting/Disconnecting the Sound Generator and Keyboard .............................. 67 Setting the Device ID Number......................................................................................... 67 Switching the MIDI Data Transmitted ........................................................................... 68 Switching the Tone Change Data Transmission/Reception Switch ................
Connecting External MIDI Devices......................................................79 Recording VR-760 Performances to an External MIDI Sequencer ....................................... 79 Connecting to External Sequencer.............................................................................................. 79 Settings for Recording .................................................................................................................. 79 Recording the Performance .......................
Panel Descriptions Front Panel fig.panÇçelF A B C D ig.panelF A 1 2 3 1. [MASTER VOLUME] knob Adjust the overall volume (p. 20). 2. RHYTHM RHYTHM [ON] button 6 5 CURSOR [ ], [ ], [ [RHYTHM VOLUME] knob This is used to modify values. Adjusts the volume level of the Rhythm part (p. 53). [ENTER] button You can modify the sound by moving your hand over the D Beam controller (p. 49). Selects one of the following three buttons. [ROTARY SPEED] button [OCTAVE] button [GLIDE] button 4.
Panel Descriptions ig.panelF B 6 7 9 10 11 12 13 8 8. REGISTRATION 11.[EDIT] button You can change a variety of settings by holding down this button and pressing the REGISTRATION buttons [1]–[7] (p. 65). [BANK] button Press these to select the REGISTRATION banks (p. 29, p. 54). 12.REVERB [1] – [8] button Press these to select the REGISTRATION numbers (p. 29, p. 54). Additionally, press these to select the Edit menu (p. 65). [WRITE] button REVERB [DEPTH] knob Adjusts the amount of reverb (p.
Panel Descriptions ig.panelF D 21 22 23 24 25 26 Piano Section 27.TONE MODIFY 21.PIANO TONE [ATTACK] knob PIANO [VARIATION] button You can change the tone variation. Each Tone button holds three different variations; as you switch the variations the button indicators changes, cycling through off, red, and green (p. 43). PIANO TONE buttons 22.MIC/AMP [DISTANCE/EQ] knob This adjusts the characteristics of the MIC/AMP modeling (p. 44).
Panel Descriptions Rear Panel fig.panelR 1 2 3 4 5 6 7 8 9 1. [POWER] Switch Switch turns the power on/off (p. 19). 2. AC Inlet Connect the included power cable to this inlet (p. 16). 3. MEMORY CARD slot Insert a CompactFlash card here (p. 6, p. 56). 4. MIDI Connectors (IN, OUT, THRU) Used for connecting external MIDI devices and for transmission of MIDI messages (p. 76, p. 79). 5. LCD CONTRAST knob Adjusts the display contrast (p. 21). 6.
Before You Begin Playing Connecting the Power Cord 1. 2. Before making a connection, make sure that the VR-760 is turned off. Connect supplied power cord to the VR-760, and plug the other end into a power outlet. fig.
Connecting the VR-760 to External Equipment NOTE The VR-760 is not equipped with an amplifier or speakers. In order to hear the sound, you will need to connect audio equipment such as a monitor speaker system or stereo set, or use headphones. Audio cables, MIDI cables, and headphones are not included. Consult your Roland dealer if you need to purchase accessories such as these.
Before You Begin Playing ■ Connecting Pedals NOTE Connect the optional pedal (DP-8, etc) to one of the Pedal jacks. When connected to the Damper jack, the pedal can be used as a damper pedal. Connecting the pedal to the CONTROL jack allows you to assign a variety of functions to the pedal (p. 66). fig.01-03(Connecting Pedals) Use only the specified expression pedal (EV-7; sold separately). By connecting any other expression pedal, you risk causing malfunction and/ or damage to the unit.
Turning the Power On and Off NOTE Once the connections have been completed, turn on power to your various devices in the order specified. By turning on devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices. ■ Turning On the Power 1. Before you switch on the power, turn the volume down all the way by rotating the [MASTER VOLUME knob. Also completely turn down the volume of any connected audio device and other equipment. fig.01-03(Volume) 2.
Before You Begin Playing Adjusting the Volume fig.01-05(Volume) 1. Adjust the volume using the [MASTER VOLUME] knob. Rotating the knob clockwise to increase the volume; counterclockwise rotation decreases it. Also adjust the volume of the connected device to an appropriate level.
1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ screen. ] button to display the “Factory Reset” fig.01-08(Factory Reset Y or N) To cancel the UTILITY, press the [EXIT] button. 3. Press the [ENTER] button. The confirmation message appears. fig.01-10(confirmation) To cancel the Factory Reset, press [EXIT] button. 4. Press the [ENTER] button once again to start the Factory Reset operation.
Before You Begin Playing Tuning to Other Instruments’ Pitches (Master Tune) For a cleaner ensemble sound while performing with one or more other instruments, ensure that each instrument’s basic pitch is in tune with that of the other instruments. In general, the tuning of an instrument is indicated by the pitch in Hertz (Hz) of the middle “A” note. This matching of other instruments’ basic reference pitches is called “tuning.
Basic organization of the VR760 The VR-760 can be divided into three sections: a keyboard controller section, a sound generator section, and a effects section. The three sections are connected internally by means of MIDI. fig.02-01(kousei) Sound Generator Section cause audio signals to be produced through an electromagnetic coil, with the audio signals to be output selected according to how the harmonic bars are set and which keys are pressed, creating the organ’s special sound.
Overview of the VR-760 Composition of the VR-760’s Parts Tones and Memories The VR-760 uses the following parts. This is the part that controls the organ sound generator. The VR-760 features one organ part, and you can control the tone with the harmonic bars (p. 33). Stores the settings that determine the VR-760’s operating environment, including settings for the SYSTEM BASIC menu in the Edit mode, as well as those for the SYSTEM MIDI menu.
Basic Operation of the VR760 ■ Basic Screen Rules ■ Main Screens fig.02-06(—In2ndRow) • If the synth and piano parts are turned off, “---” appears in the second row. Each of the organ, piano, synth, and rhythm parts features a Basic screen; you can move through the different parts by pressing the CURSOR [ ][ ] button. The registration name for the organ, piano, and synth parts appear in the first row. In the LED screen, the registration number is displayed.
Overview of the VR-760 ■ About the Controller Section fig.02-12(Panel) Organ Section The easy-to-understand arrangement of VR-760’s buttons and knobs is based on the different controls’ functions. About the CURSOR Buttons The CURSOR [ ][ ][ ][ ] buttons are used for switching screens, and for moving to an item whose setting you want to change (by moving the cursor).
Listening to the Demo Songs Here’s how to listen to the demo songs. The VR-760 features the internal demo songs that exhibit the special capabilities of the instrument. Composer Scott Tibbs Kiyomi Otaka Masashi/Kazuko Hirashita Adrian Scott Scott Tibbs Copyright © 2002 Roland Corporation © 2002 Roland Corporation © 2002 Roland Corporation © 2002 Roland Corporation © 2002 Roland Corporation Demo Song Song Name Take it Home RED 318 Dressing Up Sonique Oh So Sweet fig.03-01(sousapanel) 2 3 1 4, 5 1. 2.
Performing with the Keyboard Performing the Organ, Piano, or Synth Individually (ONE TOUCH) The VR-760 is normally set to allow you to perform with the organ, piano, and synth parts all playing together (layered). If you want to play only the organ, piano, or synth part, you will need to mute the other parts. Furthermore, if you are performing with the keyboard divided into separate key ranges (during Split Play, p. 51), you must also turn this off.
Performing with the Keyboard Performing with a Variety of Tones (REGISTRATION) The VR-760 comes with settings including organ, piano, and synth settings as well as part combination settings pre-stored in the registrations. The registrations consist of 64 memories in which you can store different settings, with eight groups (banks) each of which contain eight registrations. For more on the VR-760’s registration, refer to p. 54.
Performing with the Keyboard Changing the Volume Level of Each Part You can change the volume level of Organ, Piano, Synth, and Rhythm parts. fig.04-04(VolumeKnobs) Adding Reverberation to the Sound The VR-760 can apply a reverb effect. Applying reverb adds pleasing reverberation to what you play, so it sounds almost as if you were playing in a concert hall. You can apply the reverb effect to all parts. fig.04-05(ReverbSection) 1. Press the [REVERB TYPE] button to switch the reverb types.
Performing with the Keyboard Changing the Overall Tone Quality (MASTER EQ) fig.04-06(EQ) Performing NOTE MASTER EQ is equalization that is applied to all of the parts. You can alter the tonal coloration by adjusting the [LOW], [MIDDLE], and [HIGH] knobs. MIDDLE comprises FREQ and LEVEL settings, which allow you to change the degree of change in the midrange as well as the center frequency of the frequencies being changed.
Performing with the Keyboard ■ Aftertouch You can change the sound by pressing the keys with even greater force. The effect applied is predetermined for each tone, and cannot be changed. You can set the range over which the aftertouch changes (p. 70). ■ Damper Pedal With a damper pedal connected to the DAMPER PEDAL jack on the VR760’s rear panel, you can then add reverberation to the sound. Even after you release the keys, the sound continues to linger for as long as the damper pedal is pressed.
Performing with the Keyboard Basic Operation of the Organ Part ■ The “Harmonic Bars” That Change the Composition of the Organ Tone The harmonic bars are controllers for creating the basic structure of the organ sound. Performing By sliding nine harmonic bars in and out you can create a variety of tonalities. fig.04-08(HarmonicBar) When percussion is on, the 1' pitch will not be produced (p. 38). The numbers appearing on the harmonic bars allow you to rapidly set the bars to the desired setting.
Performing with the Keyboard The numbers (16', 5-1/3', etc.) printed on the knob of each harmonic bar indicate the pitch of that bar in “feet.” The pitch of each harmonic bar plays an important role in creating the tone. The 8' pitch is the basic pitch of the sound, and the sound is created based on this 8' pitch. The pitches of the harmonic bars are related as follows. fig.04-10(relationsOfHarmonicBar) When the middle C (C4) note is pressed, each harmonic bar will sound the following notes.
Performing with the Keyboard What Are “Feet?” Performing Historically, the “feet” (“ ' “ symbol) indications of the harmonic bars originate in the length of the pipes of a pipe organ. The length of pipe used to produce the reference pitch (the fundamental) for the keyboard is eight feet. Reducing the pipe to half its length produces a pitch one octave higher; conversely, doubling the pipe length creates a pitch one octave lower.
Performing with the Keyboard Organ Section fig.04-10a(OrganSection) ■ Changing the Organ Sound (Tone Wheel) Tone wheel and Leakage Noise are important elements in creating tone wheel organ sounds. Tone wheel Tone wheels are the ninety-one metal disks that produce the sound on tone wheel organs. Teeth are cut into the edge of each disk, and sound is generated by rotating the disks past an electrical coil at a fixed speed.
Performing with the Keyboard Each time you press the [TONE WHEEL] button, the tone wheel will switch between the following settings. Type VINTAGE1 VINTAGE2 CLEAN Explanation A tone wheel that simulates the tone wheel organs of the 70’s. A tone wheel that simulates the tone wheel organs of the 60’s. A tone wheel with no leakage noise. Leakage Noise You can adjust the Leakage Noise Volume (p. 71).
Performing with the Keyboard ■ Adding Crispness to the Sound (Percussion) Percussion adds an attack-type sound to the beginning of the note to give the sound more crispness. When you play legato (smoothly and connectedly), percussion will be added only to the first-played note. When you play staccato (articulating each note separately), percussion will be added to all notes. NOTE When percussion is on, the 1' pitch will not be produced. fig.
Performing with the Keyboard [SOFT] (Soft Percussion) button Switches the volume of the percussion. Button Explanation The percussion sound will be softer. Lit (ON) The percussion sound will be normal. Performing Dark (OFF) When you turn the [SOFT] button off to strengthen the percussion sound, the organ sound specified by the harmonic bars will become lower. This reproduces the behavior of tone wheel organs. If the organ volume decreases when you turn the [SOFT] button off, you can make settings (p.
Performing with the Keyboard [SLOW] (Slow Percussion) button NOTE Switches the speed at which the percussion sound will decay. Button You can specify the speed at which the percussion sound decays (p. 71). Explanation The percussion sound will disappear slowly. The percussion will have a more gentle attack. Lit (ON) The percussion sound will disappear quickly. The percussion will have a sharper attack. Dark (OFF) fig.
Performing with the Keyboard ■ Changing the Virtual Amp (Amplifier) fig.04-16(AmpKnobs) Changing the Virtual Amp Performing Switches the frequency response and cabinet resonance of the virtual amp. 1. Press the [AMPLIFIER] button to select the type of virtual amp. The amp type will change each time you press the [AMPLIFIER] button. Type TYPE 1 TYPE 2 TYPE 3 TYPE4 Explanation Characteristics of the most frequently used rotary speakers.
Performing with the Keyboard ■ Adding the Rotary Speaker Effect (Rotary Sound) Rotary Sound is an effect which adds the modulation that is produced when organ voices are used with a rotary speaker. On most rotary speakers, the high-frequency speaker and low-frequency speaker rotate at different speeds. The VR-760 can simulate this type of complex modulation. fig.04-17(RotaryButton) You can use a foot switch or D Beam controller to switch the rotary speaker between fast and slow.
Performing with the Keyboard Basic Operation of the Piano Part fig.04-17a(PianoSection) Performing ■ The “Tones” That Change the Piano Tone You can switch among nine tones to select the tone you want for the piano part. The nine tones can be selected from three tones and three variations. You can select the category by pressing either [A.PIANO], [E.PIANO], or [OTHERS] buttons. Press [VARIATION] button to select the variation.
Performing with the Keyboard ■ Changing the Characteristics of the Sound “Mic/Amp” The VR-760 features mic and amp modeling for the piano part, and the most appropriate modeling is selected when a tone is selected. What’s more, you can further adjust the sound with the [TYPE] button and [DISTANCE/EQ] knob.
Performing with the Keyboard 2. Turn the [DISTANCE/EQ] knob to set the type of sound characteristics you like. Mic modeling provides an effect simulating the change in distance between the sound source and the mic. Turn the knob in the + direction to get more of an “on-mic” sound; turn the knob in the - direction to get more of an “offmic” sound. The [DISTANCE/EQ] knob has no function when the mic or amp type is turned off (when either the TYPE 1 or 2 indicator is unlit).
Performing with the Keyboard Basic Operation of the Synth Part fig.04-20a(SynthSction) ■ The “Tones” That Change the Synth Tone You can switch the synth part to select the tone you prefer from 18 different tones. You can select tones from six categories, each with three variations. You can select the category by pressing either [STRINGS], [CHOIR/SCAT], [BRASS], [SYNTH LEAD], [SYNTH PAD], or [BASS] buttons. For more on the synth part’s tones, refer to the “Tone List” (p. 99).
Performing with the Keyboard ■ Making Changes to the Tones (Tone Modify) You can set the following four elements to make changes to the synth part tone. This setting is stored in the registrations. fig.04-22(4Knobs) NOTE Making large, sudden changes in the settings values may cause the sound to distort or boost the volume too much. NOTE Value ATTACK RELEASE CUTOFF RESONANCE Explanation This changes the time it takes for the sound to occur after the key is pressed.
Performing with the Keyboard ■ Adding Expression to the Sound “Active Expression” You can use the expression pedal to add expression to the synth part sound. This feature, called "Active Expression," includes control of two different functions, "FADE" and "TIMBRE." When "FADE" is selected, the volume of the synth part increases sharply as you depress the expression pedal. This allows you to use a variety of expressive techniques.
Using the Advanced Functions Using the D BEAM Controller to Produce Common Effects You can apply various effects to the sound only by moving your hand over the D Beam Controller on the VR-760 panel. fig.05-01(DBeamObPanel) Advanced Functions 1. Press any of the three buttons in the D BEAM CONTROLLER section. The indicator under the D Beam controller lights up. The following effects can be applied using the D Beam controller: Effects ROTARY SPEED OCTAVE GLIDE 2.
Using the Advanced Functions ■ Adjusting the Sensitivity of the D Beam Controller Caution When the VR-760 automatically calibrates the sensitivity of the D Beam controller, make sure no object is placed on the D Beam, and avoid having your hands near it. Also, please be aware that the D Beam will not function in a location where there is a large amount of infrared light. 1. Simultaneously press the D BEAM CONTROLLER [ROTARY SPEED] button and the [ENTER] button.
Using the Advanced Functions Dividing the Keyboard (Split) You can divide the keyboard into two key ranges and assign a different part to the left and right hand. Dividing the keyboard in two this way is referred to as a “split,” and the point at which the keyboard is split is called the split point. The split point is included in the Upper Part. fig.05-04(Keyboard) Lower Part Advanced Functions Split Point Upper Part fig.05-05(SousaPanel) 1. Press the [SPLIT] button to make its indicator light.
Using the Advanced Functions Playing Rhythm (RHYTHM) The VR-760 includes a simple rhythm part that can be used for playing drum patterns in a variety of musical styles. The rhythm part can also be used in place of a metronome when practicing, or can be used for inspiring creativity. You can select the following sets. No.
Using the Advanced Functions fig.05-07(SousaPanel) Advanced Functions 1. Press the RHYTHM [ON] button. The Rhythm begins playing. The following display is appear. fig.05-08(RythmScreen) 2. 3. Adjust the volume of the Rhythm with the [RHYTHM VOLUME] knob. Press the RHYTHM [ON] button once more; the indicator goes out, and the Rhythm stops playing. ■ Changing the Rhythm Pattern and Tempos 1. Press CURSOR [ ] button to go to the Rhythm screen.
Using the Advanced Functions Saving Settings to Registrations You can store organ, piano, and synth tones, part combinations, and other panel settings as a REGISTRATION. With your favorite settings stored in the form of registrations, you can then call up desired settings simply by pressing the appropriate REGISTRATION button. The VR-760 features 64 internal registrations.
Using the Advanced Functions 3. Press the [ENTER] button. The save begins, and a message appears in the display. In the above example, the current settings are stored in Registration 23. If you do not want to store the settings in a registration, press the [EXIT] button. The Basic screen returns to the display. Simple Method for Storing to Registrations You can store settings quickly by holding down the [WRITE] button and pressing one of the REGISTRATION buttons [1]–[8].
Using the Advanced Functions Saving to the Memory Card With the VR-760, you can take all of the content in the registration and the system settings and save them as a single file to a memory card (CompactFlash). * When using memory cards, first turn the VR-760’s power off, then insert the memory card in the MEMORY CARD SLOT as shown in the figure below. NOTE Memory cards require formatting before they are used. * Carefully insert the card in the direction indicated by the arrow.
Using the Advanced Functions ■ Formatting the Memory Card for the VR-760 (Format) This function initializes (formats) a memory card so that VR-760 data can be saved to it. Before a new memory card or a memory card used on another device can be used on the VR-760, it must be formatted on the VR-760. NOTE Please be aware that formatting will erase all the data currently stored on the memory card. 5-15(FormatCard) 2 3,4 Advanced Functions 1.
Using the Advanced Functions ■ Saving Data to Memory Card (Save File) 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the following screen. fig.05-18(SaveFile) 3. Press the [ENTER] button. The file name is displayed in the second row, and the cursor appears. Pressing the [EXIT] button, return to step 2. 4. 5.
Using the Advanced Functions ■ Loading a File from Memory Card into the VR-760 (Load File) 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. Press CURSOR [ ] button to display the following screen. Advanced Functions 2. fig.05-20(LoadFile) 3. Press the [ENTER] button. A screen like the one shown below appears. fig.05-21(SelectLoadFile) 4. 5. Press CURSOR [ ][ ] button to select file.
Using the Advanced Functions 5. Press the [ENTER] button. A screen like the one shown below appears. fig.06-11(NewName) The cursor appears at the file name to the lower left of the display. 6. Rename file. Move the cursor by using the CURSOR [ where you wish to input a character. ][ ] buttons to the location Input a character with the CURSOR [INC] [DEC] buttons. When the [ pressing the [ ] button is pressed, a single-character “A” is inserted; ] button deletes one character.
Using the Advanced Functions Controlling an External Video Device (V-LINK) With the VR-760 connected to an external video device such as the Edirol DV-7PR, you can then use the VR-760 to control the images (V-LINK function). What is V-LINK? V-LINK ( ) is a function that provides for the play of music and visual material. By using V-LINK-compatible video equipment, visual effects can be easily linked to, and made part of the expressive elements of a performance.
Using the Advanced Functions ■ How to Use the V-LINK Function 1. 2. Turn on the power to the DV-7PR, and start up Presenter. Press the [V-LINK] button so its indicator lights up. The message “Video link system is ON” appears on the VR-760’s screen, indicating that the video control mode is enabled. Data for enabling communication (such as information about the channel to be used for transmission), is sent from the VR-760 to the DV-7PR.
Detailed Settings for Each Function (EDIT) Edit mode allows you to get the most out of the VR-760’s functions by making more detailed settings. This section explains the functions that can be set in Edit mode. In this owner’s manual, the process of modifying a setting is referred to as “editing,” and the item of data that is modified is referred to as a “parameter.” About the Edit Mode Menu The VR-760’s Edit mode can be broadly divided into seven main menus.
Detailed Settings for Each Function (EDIT) REGISTRATION ORGAN REGISTRATION SYNTH These are the settings stored to individual registrations that affect the organ part. These are the settings stored to individual registrations that affect the synth part.
Detailed Settings for Each Function (EDIT) Basic Procedure 1. Hold down the [EDIT] button, and press the REGISTRATION [1]–[7] button. 2. Press CURSOR [ ][ ] button to select the parameter. 3. Press the [INC] and [DEC] buttons to change the values. Switching the Damper Pedal’s Polarity Damper Polarity (STANDARD/REVERSE) Switch the polarity of damper pedals connected to the VR760. On some pedals, the electrical signal output by the pedal when it is pressed or released is the opposite of other pedals.
Detailed Settings for Each Function (EDIT) Assigning Functions to Control Pedal Ctrl Pdl Assign This setting determines the function of the pedal switches or expression pedals (such as the optional EV-7) that are connected to the CONTROL PEDAL jacks on the rear panel.
Detailed Settings for Each Function (EDIT) Adjusting the Sensitivity of the D Beam D Beam Sens (0–127) You can Adjust the Sensitivity of the D Beam. The value is a range of 0–127. MIDI Settings that Act on the VR-760 Globally (SYSTEM MIDI) Sensitivity increases as the value is raised. Connecting/Disconnecting the Sound Generator and Keyboard You can also have the D Beam sensitivity adjusted automatically (p. 50).
Detailed Settings for Each Function (EDIT) Switching the MIDI Data Transmitted Setting the MIDI Channel for Each Part MIDI Tx Mode (INTERNAL/EXTERNAL/BOTH) Ctrl MIDI Ch (1–16) You can change the type of MIDI data to be transmitted, depending on whether you are recording to an external MIDI sequencer, or controlling an external MIDI device. These set the MIDI transmit and receive channels used for controlling the VR-760.
Detailed Settings for Each Function (EDIT) Changing the Tone Wheel Brake Message Settings of REGISTRATION (REGISTRATION COMMON) TWBrk Ctrl Msg (1–8) This determines the number of the message to be used for transmitting and receiving the status of the wheel brake effect produced using the control pedal. Renaming a REGISTRATION Regist Name You can set any general-purpose controller 1–8. You can rename a REGISTRATION. You can use up to twelve characters in naming registrations.
Detailed Settings for Each Function (EDIT) Determining the MIDI Output Key Range in Split Play Setting of Rhythm External Part Assign (UPPER/LOWER/BOTH) This changes the volume level of the rhythm part. This setting performs the same function as the panel [RHYTHM VOLUME] knob. This sets the key range for which Note messages are output from MIDI OUT when Split Play is used.
Detailed Settings for Each Function (EDIT) Organ Settings for Registrations (REGISTRATION ORGAN) Organ Volume (0–127) This changes the volume level of the organ part. This setting performs the same function as the panel [ORGAN VOLUME] knob. Organ Octave Shift (-2–+2) This changes the pitch of the organ part in octave units. Organ Fine Tune (-50–+50) This adjusts the pitch of the organ part in cent (1/100 semitone) units.
Detailed Settings for Each Function (EDIT) Adjusting the Amount of Overdrive Setting the Rotary Speed Overdrive Level (0–127) Rotary Woofer Slow Speed (0–127) This adjusts the amount of the overdrive (distortion) effect applied. The sound becomes more distorted more as the value is increased. Specifies the rotational speed for the Slow setting of the rotary speaker. Specifies the rotational speed for the lowrange speaker (woofer). Increasing the value raises the speed.
Detailed Settings for Each Function (EDIT) Piano Settings for Registrations (REGISTRATION PIANO) Piano Volume (0–127) This changes the volume level of the piano part. This setting performs the same function as the panel [PIANO VOLUME] knob. Changing the Function of the Mic/Amp Mic/Amp SW (MIC SIM/AMP SIM) This changes the function of the MIC/AMP section on the panel. Value MIC SIM AMP SIM Explanation Selects the Mic Simulation function. This is effective with acoustic sounds.
Detailed Settings for Each Function (EDIT) This sets the strength of the effect when wah is selected for MFX. The change becomes easier to detect as the value is raised. Synth Settings for Registrations (REGISTRATION SYNTH) Phaser Reso (0–127) Synth Volume (0–127) This sets the strength of the effect when phaser is selected for MFX. The change becomes easier to detect as the value is raised. This changes the volume level of the synth part.
Detailed Settings for Each Function (EDIT) Creating Smooth Pitch Changes (Portamento) Portamento is a function that causes the pitch to change smoothly from one note to the next note played. With the MONO/POLY parameter set to MONO, portamento is especially effective when simulating playing techniques such as a violin glissandos. Portamento SW (ON/OFF) This set the switch of portamento on or off.
Detailed Settings for Each Function (EDIT) Convenient Functions (UTILITY) ■ Transferring the VR-760’s Settings to an External MIDI Device (Bulk Dump) ■ Checking the Installed Wave Expansion Boards (SRX Info) You can transfer the contents of Registrations and the VR760’s system settings to an external MIDI device. This operation is called “bulk dump.” Check to confirm that the installed boards are being recognized correctly. 1.
Detailed Settings for Each Function (EDIT) Bulk Dump Temp Bulk Dump All Transmit the contents of the selected Registration. This send all settings. 1. Hold down the [EDIT] button, and press the 1. Hold down the [EDIT] button, and press the REGISTRATION [7] (UTILITY) button. REGISTRATION [7] (UTILITY) button. The Edit’s “UTILITY” screen is displayed. The Edit’s “UTILITY” screen is displayed. 2. Press CURSOR [ ] button to display the following screen. fig.
Detailed Settings for Each Function (EDIT) Loading Back Data That’s Been Saved on an External Sequencer 1. Make sure that the power of the VR-760 and your sequencer is off. Turn off the power of the VR-760 and the other device before making connections. If you connect an external device when the power is turned on, damage or malfunctions may occur. 2. Connect the VR-760’s MIDI IN connector to the sequencer’s MIDI OUT connector 3. Turn on the power of the external sequencer and the VR-760. 4.
Connecting External MIDI Devices About MIDI MIDI (Musical Instrument Digital Interface) is a worldwide standard for exchanging music data among electronic musical instruments and computers. MIDI does not send audio signals, but instead converts performance data and commands into digital data for transmission. The digital data handled by MIDI is collectively referred to as MIDI messages.
Connecting External MIDI Devices ■ Recording the Performance ■ About the Local Control Use the following procedure when recording to an external sequencer. The switch that connects and disconnects the MIDI connection between the keyboard controller section and the sound generator section (p. 23) is called the Local switch.
Connecting External MIDI Devices Playing the VR-760’s Internal Sound Generator from an External MIDI Device ■ Making Connections ■ Setting the Channels Set the VR-760’s receive channel to match the external MIDI device’s transmit channel. For instructions on setting the VR-760’s Receive channel, refer to “Setting the MIDI Channel for Each Part” (p. 68). When both channels are matched, playing the external MIDI device produces sounds from the VR-760’s sound generator. fig.
Connecting External MIDI Devices Switching Tones The MIDI messages transmitted by the external MIDI device will be received by the VR-760 to select Tones as shown in the following table. Group Bank Select Program Change Number MSB LSB Piano 87 64 1-9 Synth 87 65 1-18 Synth Active 87 66 1-18 Exp Timbre The following shows a breakdown of the different Program Change numbers. Piano Section PC Variation A.Piano E.
Installing the Wave Expansion Board Up to two optional Wave Expansion Boards (SRX Series) can be installed in the VR-760. Install the Wave Expansion Boards after removing the bottom panel cover. Wave Expansion Boards store Wave data, Patches, and Rhythm Sets, and by equipping the VR-760 with these boards, you can greatly expand your sound palette. There are two slots (A and B) into which a board can be installed.
Installing the Wave Expansion Board 3. Insert the Wave Expansion Board connector into a connector for an SRX Series slot (SRX A or SRX B), while simultaneously inserting the board holders into the holes in the Wave Expansion Board. fig.08-04 Wave Expansion Board (SRX series) Checking the Installed Wave Expansion Boards After installation of the Wave Expansion Boards has been completed, check to confirm that the installed boards are being recognized correctly. 1.
Installing the Wave Expansion Board Installation de la carte d’extension Wave (French language for Canadian Safety Standard) Vous pouvez installer jusqu’à 2 cartes d’extension optionnelles dans le VR-760. Ces cartes d’extension mémorisant des données Wave, des morceaux et des ensembles rythmiques, elles vous permettront d’augmenter considérablement le timbre. Precautions lors de l’installation de la carte d’extension Wave ● N’installez que les cartes de circuits imprimes spécifiées (SRX Series).
Installing the Wave Expansion Board 3. Insérer le connecteur de la carte dans un des créneaux pour la série SRX (SRX A, SRX B) tout en enfonçant les supports à carte dans les trous de celle-ci. fig.08-04 Vérification des cartes d’extension audio aprés installation Lorsque l’installation des cartes d’extension audio est terminée, procéder à une vérification pour s’assurer que l’ordinateur les identifie correctement. Carte d'extension Wave (serie SRX) 1.
Troubleshooting If the VR-760 does not function in the way you expect, first check the following points. If this does not resolve the problem, consult your dealer or a nearby Roland Service Station. * If certain messages appear in the display during operation, please refer to “Messages and Error Messages” (p. 90). Problem No power No sound/Low volume Check The power cable is not connected to the VR-760 or to the power outlet. The power to the connected device is not turned on.
Troubleshooting Problem Clicking is audible when the keys are pressed/released No piano part sound Check With tone wheel organs, noises called “clicks” are generated when the keys are pressed and released. Although originally seen as a drawback, sounds with this noise mixed in have come to be used in a variety of different kinds of music, and now it is recognized as a characteristic of the organ sound. The VR-760 faithfully reproduces the tone wheel organ’s click sound. The piano volume is turned down.
Troubleshooting Problem Hold pedal and control pedal functions are reversed Check The control pedal polarity is reversed. D Beam sensitivity poor/malfunctioning The D Beam sensitivity setting has gone out of adjustment. There is an excessive amount of infrared light present at the place where the instrument is being used. V-LINK is on. No sound from the low end of the keyboard No rhythm sounds Clock Source is set to MIDI.
Messages and Error Messages This section lists the messages (error messages) that the VR-760 produces and explains the meaning of each message, giving you to appropriate action to take. Message Meaning Action BULK: Check Sum Error The checksum value of a system exclusive message was incorrect. Transmission of bulk data is in progress. The bulk data could not be received correctly. Correct the checksum value. Sending...
Effects/Parameter List The multi-effects feature 40 different kinds of effects. Some of the effects consist of two different effects connected in series or in parallel. Parameters marked with a sharp “#” can be controlled using the MFX [CONTROL] knob on the Synth section (Two setting items will change simultaneously for “#1” and “#2”). 1: STEREO EQ (Stereo Equalizer) This is a four-band stereo equalizer (low, mid x 2, high).
Effects/Parameter List 6: ENHANCER 9: COMPRESSOR Controls the overtone structure of the high frequencies, adding sparkle and tightness to the sound. Flattens out high levels and boosts low levels, smoothing out unevenness in volume.
Effects/Parameter List 13: SPACE-D 16: STEP FLANGER This is a multiple chorus that applies two-phase modulation in stereo. It gives no impression of modulation, but produces a transparent chorus effect. This is a flanger in which the flanger pitch changes in steps. The speed at which the pitch changes can also be specified in terms of a note-value of a specified tempo. Parameter Value Explanation Parameter Value Explanation Pre Delay 0.0–100.0 ms Pre Delay 0.0–100.
Effects/Parameter List 18: MOD DELAY (Modulation Delay) 19: TRI TAP DLY (Triple Tap Delay) Adds modulation to the delayed sound, producing an effect similar to a flanger. Produces three delay sounds; center, left and right. fig.02-019m Balance D When Mode is NORMAL: L in fig.02-018am Balance D L in Delay Modulation 2-Band EQ L out Triple Tap Delay Balance W Feedback R in Balance D Balance W 2-Band EQ R out fig.
Effects/Parameter List 21: TIME CTRL DLY (Time Control Delay) This effect allows you to use the MFX [CONTROL] knob on the Synth section to control the delay time and pitch in realtime. Lengthening the delay will lower the pitch, and shortening it will raise the pitch. Parameter Value Explanation Delay # 200–1000 ms Accel 0–15 Adjusts the delay time from the direct sound until the delay sound is heard.
Effects/Parameter List 25: GATED REVERB This is a special type of reverb in which the reverberant sound is cut off before its natural length. 27: OD -> FLANGER (Overdrive -> Flanger) fig.
Effects/Parameter List 30: DIST -> FLANGER (Distortion -> Flanger) 34: ENHANCR -> DELAY (Enhancer -> Delay) The parameters are essentially the same as in “27: OD -> FLANGER,” with the exception of the following two. OD Drive -> Dst Drive, OD Pan -> Dist Pan fig.02-034m L in L out Enhancer Balance D Mix Balance W Delay 31: DIST -> DELAY (Distortion -> Delay) The parameters are essentially the same as in “28: OD -> DELAY,” with the exception of the following two.
Effects/Parameter List 36: FLANGER -> DELAY 38: CHORUS/DELAY fig.02-036m The parameters are the same as for “35: CHORUS -> DELAY.” However, the Delay Balance parameter adjusts the volume balance between the direct sound and the delay sound. Balance D L in L out Balance D Feedback Flanger fig.02-038m Balance W Balance W Delay Balance W Balance W Feedback R in Balance D Parameter Value Explanation Flg Delay 0.0–100.0 ms Flg Rate Flg Depth Flg Fbk 0.05–10.
Tone List Piano Tone Synth Tone [Acoustic Piano] [Strings] [Synth Lead] No. PatchName No. PatchName No. PatchName 1 2 3 ConcertGrand Classical Pf European Pf 1 2 3 Orch Strings European Str Jupiter8 Str 1 2 3 Vintage Lead Dual Lead Retro Lead [Electric Piano] [Choir] [Synth Pad] No. PatchName No. PatchName No. PatchName 1 2 3 Rhodes Mark 1 Rhodes Mark 2 Dyno Rhodes 1 2 3 Real Choir Female Vox Jazz Scat 1 2 3 OB Pad 2.3 Pad Glassy Pad [Other Piano] [Brass] [Bass] No.
Settings You Can Alter and Store Settings Stored to the System • • • • • • • • • • • • Master Tune Key Transpose Key Touch Damper Polarity Organ Damper SW Synth Damper SW Piano Expression SW Control Pedal Polarity Control Pedal Assign Quick Firing V-Link KBD Clock Source • D Beam Sensitivity (This cannot be stored to memory cards.) • Local Control (Always ON at power-up.
Shortcut List [EDIT] + Bender [EDIT] + Aftertouch [EDIT] + Damper [EDIT] + Expression [EDIT] + CTRL Pedal [EDIT] + [SPLIT] [EDIT] + [V-LINK] [EDIT] + [REVERB] knob [EDIT] + [REVERB TYPE] [EDIT] + [RHYTHM] [EDIT] + [RHYTHM] knob [EDIT] + one of the [D BEAM] button [EDIT] + one of the REGISTRATION [1]–[8] [EDIT] + [ORGAN VOLUME] knob [EDIT] + [PERC.SOFT] [EDIT] + [PERC.SLOW] [EDIT] + [PERC.
MIDI Implementation Model: Date: Version: VR-760 (Performance Keyboard) Nov. 1, 2002 1.00 1. Receive data ●Note off * 3rd byte vvH 00H 0H - FH (ch.1 - 16) 00H - 7FH (0 - 127) 00H - 7FH (0 - 127) Some instruments are not received in Rhythm set. * 3rd byte vvH 0H - FH (ch.1 - 16) 00H - 7FH (0 - 127) 01H - 7FH (1 - 127) Not received by the Organ Part. ❍Bank Select (Controller number 0, 32) * * * 3rd byte vvH 0H - FH (ch.1 - 16) 00H - 7FH (0 - 127) 3rd byte mmH llH 0H - FH (ch.
MIDI Implementation ❍Soft (Controller number 67) Status 2nd byte BnH 43H n = MIDI channel number: vv = Control value: * ❍General Purpose Controller 5 (Controller number 80) 3rd byte vvH 0H - FH (ch.1 - 16) 00H - 7FH (0 - 127) 0 - 63 = OFF, 64 - 127 = ON Only received by the Piano Part. Status 2nd byte BnH 50H n = MIDI channel number: vv = Control value: * 3rd byte vvH 0H - FH (ch.1 - 16) 00H - 7FH (0 - 127) Depending on the Control Message settings (Edit: System MIDI: Control Message).
MIDI Implementation ❍RPN MSB/LSB (Controller number 100, 101) Status 2nd byte 3rd byte BnH 65H mmH BnH 64H llH n = MIDI channel number: 0H - FH (ch.1 - 16) mm = upper byte (MSB) of parameter number specified by RPN ll = lower byte (LSB) of parameter number specified by RPN <<< RPN >>> Control Changes include RPN (Registered Parameter Numbers), which are extended.
MIDI Implementation ■System Realtime Message ●Timing Clock Status F8H * This message will be received if the Clock Source parameter (Edit:System Basic:Clock Source) is MIDI. ●Active Sensing Status FEH * When Active Sensing is received, the unit will begin monitoring the intervals of all further messages.
MIDI Implementation ❍Data set 1 DT1 This is the message that actually performs data transmission, and is used when you wish to transmit the data. Status F0H Byte F0H 41H dev 00H 5FH 12H aaH bbH ccH ddH eeH : ffH sum F7H * * * Data byte 41H, dev, 00H, 5FH, 12H, aaH, bbH, ccH, ddH, eeH, ...
MIDI Implementation ❍General Purpose Controller 3 (Controller number 18) ❍Portamento Control (Controller number 84) Status 2nd byte BnH 12H n = MIDI channel number: vv = Control value: Status 2nd byte BnH 54H n = MIDI channel number: kk = source note number: * 3rd byte vvH 0H - FH (ch.1 - 16) 00H - 7FH (0 - 127) Depending on the Control Message settings (Edit: System MIDI: Control Message).
MIDI Implementation ●Active Sensing Status FEH * This message is transmitted at intervals of approximately 250 msec. 01H CPM CLM sum F7H Data (V-LINK ON) Data (Clip Ctrl Rx MIDI ch : External Part Channel) Data (Color Ctrl Rx MIDI ch) Checksum EOX (End Of Exclusive) ❍V-LINK OFF ■System Exclusive Messages Universal Non-realtime System Exclusive Message” and Data Set 1 (DT1) are the only System Exclusive messages transmitted by the VR-760.
MIDI Implementation 3. Parameter Address Map * Transmission of “#” marked address is divided to some packets. For example, ABH in hexadecimal notation will be divided to 0AH and 0BH, and is sent/received in this order.
MIDI Implementation | 00 00 00 30 | Total Size | +——————————————————————————————————————————————————————————————————————————————+ ❍Registration Piano +——————————————————————————————————————————————————————————————————————————————+ | Offset | | | Address | Description | |—————————————+————————————————————————————————————————————————————————————————| | 00 00 | 0000 000a | Part Switch (0 — 1) | | | | OFF, ON | | 00 01 | 0aaa aaaa | Bank Select MSB (CC# 0) (0 — 127) | | 00 02 | 0aaa aaaa | Bank Select LSB (CC
MIDI Implementation ■Decimal and Hexadecimal Table (An “H” is appended to the end of numbers in hexadecimal notation.) In MIDI documentation, data values and addresses/sizes of Exclusive messages, etc. are expressed as hexadecimal values for each 7 bits. The following table shows how these correspond to decimal numbers.
MIDI Implementation ■Example of an Exclusive Message and Calculating a Checksum ■ASCII Code Table Roland Exclusive messages (RQ1, DT1) are transmitted with a checksum at the end (before F7) to make sure that the message was correctly received. The value of the checksum is determined by the address and data (or size) of the transmitted Exclusive message.
MIDI Implementation Performance Keyboard Model VR-760 Date : Nov. 1, 2002 Version : 1.00 MIDI Implementation Chart Transmitted Function...
Specifications VR-760: Performance Keyboard Keyboard Sound Generator Part Maximum Polyphony Wave Memory Organ Section Piano Section Synth Section Rhythm Section Internal Memory D Beam Reverb Master EQ Expansion Slot External Memory Other Functions Display Connectors Power Supply Power Consumption Dimensions Weight Accessories Options Waterfall 76 keys (with velocity and aftertouch) Organ Virtual ToneWheel Piano, Synth, Rhythm PCM Organ, Piano, Synth, Rhythm Organ Full Polyphony Piano, Synth, Rhythm 12
Index A A.PIANO button ........................................................... 43 AC Inlet ........................................................................... 15 ACTIVE EXPRESSION ........................................... 14, 48 Aftertouch ...................................................................... 32 AftTouch Sens ................................................................ 70 Amp Modeling ..............................................................
Master Tune ............................................................. 22, 65 MASTER VOLUME knob ...................................... 12, 20 Memory Card ............................................................. 6, 56 Format ....................................................................... 57 Load File ................................................................... 59 Rename File ........................................................ 59–60 Save ...........................................
ROTARY SLW/FST ................................................ 66, 70 Rotary Sound ................................................................. 42 ROTARY SPEED (Ctrl Pdl Assign) ............................. 66 ROTARY SPEED button ............................................... 12 Rotary Tweeter Fall Time ............................................. 72 Rotary Tweeter Fast Speed .......................................... 72 Rotary Tweeter Level ....................................................
Information When you need repair service, call your nearest Roland Service Center or authorized Roland distributor in your country as shown below. AFRICA EGYPT Al Fanny Trading Office 9, EBN Hagar A1 Askalany Street, ARD E1 Golf, Heliopolis, Cairo 11341, EGYPT TEL: 20-2-417-1828 REUNION Maison FO - YAM Marcel 25 Rue Jules Hermann, Chaudron - BP79 97 491 Ste Clotilde Cedex, REUNION ISLAND TEL: (0262) 218-429 PANAMA ITALY ISRAEL SUPRO MUNDIAL, S.A. Roland Italy S. p. A.
To resize thickness, move all items on the front cover and center registration marks to left or right. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION: RISQUE DE CHOC ELECTRIQUE NE PAS OUVRIR CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
To resize thickness, move all items on the front cover and center registration marks to left or right Owner’s Manual Thank you, and congratulations on your choice of the Roland Performance Keyboard VR-760. 201b Before using this unit, carefully read the sections entitled: “IMPORTANT SAFETY INSTRUCTIONS” (Owner’s manual p. 2), “USING THE UNIT SAFELY” (Owner’s manual p. 3), and “IMPORTANT NOTES” (Owner’s manual p. 5). These sections provide important information concerning the proper operation of the unit.