Owner's manual
23
Parameter List
Parameter List
■
Play/Recording Parameter [UTILITY]
→
[(Page1) F4 (PlyRec)]
Parameter name Display Value,
Initial value
Record Monitor RECORD MONITOR
Auto
, Source
Marker Stop MARKER STOP
Off
, On
Fade Curve FADE CURVE
Linear
, Exp
Fade Length FADE LENGTH 2,
10
, 20, 30, 40, 50 ms
Vari Pitch Switch VARI PITCH Sw
Off
, On
Vari Pitch Vari Pitch 16.00 kHz–
96.00 kHz
–98.00 kHz (fs=96.0 kHz)
16.00 kHz–
88.20 kHz
–98.00 kHz (fs=88.2 kHz)
16.00 kHz–
64.00 kHz
–98.00 kHz (fs=64.0 kHz)
16.00 kHz–
48.00 kHz
–50.00 kHz (fs=48.0 kHz)
16.00 kHz–
44.10 kHz
–50.00 kHz (fs=44.1 kHz)
16.00 kHz–
32.00 kHz
–50.00 kHz (fs=32.0 kHz)
Solo/Mute Switch Type SOLO/MUTE Sw TYPE
All Bus Send
, MIX BUS Send
Scrub Length SCRUB LENGHT 25–
45
–100 ms
Preview To Length PREVIEW TO LENGHT
1.0
–10.0 sec
Preview From Length
PREVIEW FROM LENGHT
1.0
–10.0 s
■
MIDI Parameter [UTILITY]
→
[(Page1) F5 (MIDI)]
Parameter name Display Value,
Initial value
MIDI through Switch MIDI OUT/THRU
Out
, Thru
Device ID DEVICE ID 1–
17
–32
Control Local Switch CONTROL LOCAL SW Off,
On
System Exclusive Receive Switch SysEx. Rx Sw Off,
On
System Exclusive Transmit Switch SysEx. Tx Sw
Off
, On
Mixer Control Type MIXER CONTROL TYPE
Off
, C.C., Excl
Scene Program Change Receive Switch SCENE P.C. Rx Sw
Off
, On
Effect Program Change Receive Switch Effect P.C. Rx Sw
Off
, On
Effect Control Change Receive Switch Effect C.C. Rx Sw
Off
, On
MMC Mode MMC MODE Off,
MASTER
, SLAVE
MMC source MMC SOURCE
MIDI,
R-BUS1, R-BUS2
■
Sync Parameter [UTILITY]
→
[(Page1) F6 (SYNC)]
Parameter name Display Value,
Initial value
Sync Mode SYNC MODE
INT
, EXT
Sync with Gap SYNC with Gap
Off
, On
External Sync Source EXT SYNC SOURCE
MIDI IN
, R-BUS1, R-BUS2, SMPTE IN
Sync Offset Time SYNC OFFSET TIME
00:00:00:00.00
–23:59:59:29.99(*)
Frame Rate FRAME RATE
30
, 29N, 29D, 25, 24
Error Level ERROR LEVEL 0–
5
–10
MIDI OUT Sync Generator MIDI OUT SYNC Gen.
Off
, MTC, MIDIclk, SyncTr
R-BUS1 OUT Sync Generator R-BUS1 SYNC Gen.
Off
, MTC
R-BUS2 OUT Sync Generator R-BUS2 SYNC Gen.
Off
, MTC
* The settable value for Offset will change slightly depending on the MTC type.
■
Tempo Map [UTILITY]
→
[(Page2) F1 (TEMPO)]
Parameter name Display Value,
Initial value
Tempo Map Number MAP #
1
–50
Beat BEAT 1/1–16/1, 1/2–16/2, 1/4–
4/4
–16/4, 1/8–16/8, 1/16–16/16
Tempo = 25.0–
120.0
–250.0
Measure MEASURE
1
–999
2480v2_app_e.book 23 ページ ２００６年２月７日 火曜日 午後３時３３分