E ENGLISH
Digital Camera >> FCC STATEMENT This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC rules.
Microsoft R and Windows R are U.S. registered trademarks of Microsoft Corporation. Pentium R is a registered trademark of Intel Corporation. Macintosh is a trademark of Apple Computer, Inc. SDTM is a trademark. Other names and products may be trademarks or registered trademarks of their respective owners. User’s Manual >> TRADEMARK INFORMATION READ THIS FIRST Notice: 1. Product design and specifications are subject to change without notice.
Digital Camera >> WARNING Do not use this camera if it is emitting smoke (or an unusual odor), if it becomes unusually hot to the touch, produces a peculiar noise, or exhibits any other abnormal conditions. Operating the camera in any of these circumstances may cause a fire or an electrical shock. Stop using the camera immediately, turn the camera off and remove the battery. Contact your dealer or authorized service facility for repairs.
Do not place this camera in a location affected by oil fumes or steam, such as near a cooking stove or humidifier. This may cause a fire or an electrical shock. Do not leave this camera in a location subject to extremely high temperatures, such as in a sealed vehicle or in direct sunlight. Exposure to high temperatures may adversely affect the camera case and internal components and may cause a fire. User’s Manual >> CAUTION Do not cover or wrap the camera with a cloth or quilt.
Digital Camera >> CONTENTS 8 INTRODUCTION 8 10 Overview Package Contents 11 GETTING TO KNOW THE CAMERA 11 12 14 15 16 Front View Rear View Mode dial Viewfinder LED Indicator LCD Monitor Icons 19 GETTING STARTED 19 19 21 23 24 25 26 27 28 Attaching the Camera Strap Inserting and Removing the Battery (Optional Accessory) Charging the Battery Inserting and Removing the SD Card (Optional Accessory) Turning the Power On/Off Formatting the SD Card Choosing the Language Setting the Date and Time Setting Ima
49 51 53 54 55 56 57 58 60 62 ] PLAYBACK MODE Playing Back Still Images Playing Back Video Clips Playing Back Still Images/Video Clips on a TV Recording Voice Memos Thumbnail Display Zoom Playback Slideshow Display Protecting Images DPOF Settings [ ] Erasing Images User’s Manual >> 49 [ 64 MENU OPTIONS 64 66 69 71 72 74 Photography Menu (Picture) Photography Menu (Function) Photography Menu (AE/AWB) Playback Menu Setup Menu (Basic) Setup Menu (Custom) 76 TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR
Digital Camera >> INTRODUCTION Overview Congratulations on your purchase of the new digital camera. Capturing high-quality digital pictures is fast and easy with this state-of-the-art smart camera. Equipped with a 6.3 Mega pixel CCD, this camera is capable of capturing pictures with a resolution of up to 2816 x 2112 pixels. Other cool features provided by the camera include the following: LCD monitor The 2.
Record video clips with voice. A voice memo can be recorded once for 30 seconds at photography mode immediately following a still image captured or at playback mode while viewing the picture. Camera settings Have more control over picture quality by adjusting the menu options. Thumbnail display Display in sets of nine pictures on the LCD for easier and quicker selection of pictures. TV and PC connection - View pictures on a television monitor or computer while connected to the USB or A/V cable.
Digital Camera >> Package Contents Carefully unpack your camera and ensure that you have the following items.
Front View # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. User’s Manual >> GETTING TO KNOW THE CAMERA Name Self-timer LED (AF auxiliary light) Description Blinks green during Self-timer mode until picture is taken. Effective for still image capture mode when the luminance value of Auto and Macro focus mode is below 6. Viewfinder window Allows you to frame the subject of the picture. Flash Provides flash illumination.
Digital Camera >> Rear View # 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 12-E Name Description Diopter adjustment dial Provides a more clear image when using the viewfinder. Viewfinder window Allows you to frame the subject of the picture. Viewfinder LED Displays the camera current state. (Zoom in) button Zooms the lens to telephoto position. (Zoom out) button Zooms the lens to wide-angle position. Speaker Produces camera sounds and plays recorded audio. MENU button Toggles OSD menu on and off.
User’s Manual >> SET /Direction button # 1. Name SET button 2. button 3. 4. 5. Description Enters the menu page and confirms the chosen setting. Scrolls upwards. (Focus) button Allows you to choose the appropriate focus setting. button Scrolls downwards. (Self-timer) Allows you to toggle the self-timer on/off, button selects the desired self-timer mode or choose the interval photography. button Scrolls left.
Digital Camera >> Mode dial : photography mode # Mode 1. Auto photography 2. P Program (auto exposure) Description The camera is automatically set for exposure, etc. This permits the shutter speed and aperture to be set automatically and other factors to be set manually. 3. Tv Shutter speed priority Select this when you want to photograph with shutter speed priority. 4. Av Aperture priority Select this when you want to photograph with aperture priority. 5.
This describes the color and state of the viewfinder LED. Color State During power off During photography On Battery charging in progress. Auto focusing successful. (AF is locked) Flashing - Green On Red Flashing On AC adaptor plug in - Battery charging error. - Writing to SD card in progress Auto focusing failure Interval photography stand by Processing image. Flash charging in progress. During playback - During connection to a PC While the camera is connected to a PC.
Digital Camera >> LCD Monitor Icons Photography modes [ 1. 2. 3. 4. 5. 6. 7. 8. 9. Mode icon Focus icon Unsteady hold warning icon Zoom status Focus area (When the shutter button is pressed halfway.) Voice memo Remaining battery status Flash icon Image size ][ ][ ][ ] 10. Quality 11. Capture mode icon 12. Self-timer icon 13. Possible number of shots 14. White balance icon 15. Metering icon 16. Backlight correction 17.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Mode icon Focus icon Unsteady hold warning icon Zoom status Focus area (When the shutter button is pressed halfway.) Voice memo Remaining battery status Flash icon Image size Quality User’s Manual >> Photography modes [ P ] [ Tv ] [ Av ] [ M ] 11. Capture mode icon 12. Self-timer icon 13. Possible number of shots 14. White balance icon 15. Metering icon 16. Exposure compensation 17. Shutter speed 18. Aperture 19. Histogram 20.
Digital Camera >> Photography mode [ ] 1. 2. 3. 4. 5. 6. 7. 8. Mode icon Focus icon Zoom status Remaining battery status Image size Quality Self-timer icon Possible recording time/ elapsed time 9. Recording indicator Playback mode [ ]-Still Picture Playback 1. 2. 3. 4. 5. Playback mode [ ]-Video Playback 1. 2. 3. 4. 5. 6. 7. 8.
User’s Manual >> GETTING STARTED Attaching the Camera Strap Attach the camera strap as shown in the illustration. Inserting and Removing the Battery (Optional Accessory) We highly recommend using specified rechargeable lithium-ion battery to fully demonstrate this camera’s function. Charge the battery before using the camera. Make sure that the power of the camera is off before inserting or removing the battery. Inserting the Battery 1. Open the battery/SD card cover.
Digital Camera >> 2. Insert the battery in the correct orientation shown. Tilt the battery lock lever in the direction of the arrow and orient the battery so that its label is facing to the front side of the camera, and then insert the battery. 3. Close the battery/SD card cover. 2 1 Removing the Battery Open the battery/SD card cover and then release the battery lock lever. When the battery has come out a little, slowly pull it out the rest of the way.
New battery or the battery that has not been used for an extended period of time (the battery that passed the expiry date is an exception) might affect the number of pictures that can be taken. Therefore, to maximize its performance and lifetime, we recommend that you fully charge the battery and discharge it for at least one complete cycle before use. Using the optional AC power adapter charges the battery. Make sure that the power of the camera is off and then insert the battery before starting.
Digital Camera >> 22-E This camera must be used with specified AC power adapter. Damage caused by the use of an incorrect adapter is not covered under the warranty. When the charging is not started even if following the above procedure, turn the power on at any mode after LCD indication appears, and then turn the power off. The battery may feel warm after it has been charged or immediately after being used. This is normal and not a malfunction.
Images photographed with this camera will be stored on the SD card. Without inserting the SD card, you cannot take photographs using the camera. Before inserting or removing the SD card, make sure that the power of the camera is off. Inserting the SD card 1. Open the battery/SD card cover. 2. Insert the SD card in the correct orientation shown. Hold the SD card with its metal contact end surface facing the rear side of the camera, and then insert the card as far as it can go. 3.
Digital Camera >> Turning the Power On/Off Load the battery and insert an SD card before starting. Turning the power on Press the POWER button to turn the power on. The viewfinder LED lights green and the camera is initiated. When the power is turned on, the camera will start in the mode that was set with the mode dial. Turning the power off Press the POWER button to turn the power off. The power is turned off automatically when the camera has not been operated for a fixed period of time.
This erases all of the images and folders that have been recorded on the SD card. Formatting is not possible when the SD card is in the locked condition. 1. Set the mode dial to [ ]. [Basic] of the set-up menu is displayed. User’s Manual >> Formatting the SD Card 2. Select [Format] with the / buttons from [Basic] of the set-up menu, then press the SET button. / buttons, 3. Select [Execute] with the and press the SET button. To cancel formatting, select [Cancel] and press the SET button.
Digital Camera >> Choosing the Language When you first turn the camera on, choose a language for displayed information on the LCD monitor. 1. Set the mode dial to [ ] and press the button [Custom] of the set-up menu is displayed. 2. Select [Language] with the / buttons and press the SET button. The Language setting screen will be displayed. Select the displayed language using the / buttons and press the SET button. The setting will be stored.
The date/time needs to be set if/when: Camera is turned on for the first time. Camera is turned on after leaving the camera without the battery for an extended period of time. When the date and time information is not displayed on the LCD monitor, follow these steps to set the correct date and time. User’s Manual >> Setting the Date and Time 1. Set the mode dial to [ ] and press the button. [Custom] of the set-up menu is displayed. 2. Select [Date/Time] with the / buttons and press the SET button.
Digital Camera >> Setting Image Resolution and Quality Resolution and quality settings determine the pixel size (dimension), image file size, and compression ratio for your images. These settings affect the number of images that can be stored in memory, or on a memory card. As you get to know the camera, it is recommended that you try each quality and resolution setting to get an appreciation for the effects that these settings will have on your images.
The table shows the approximate shots that you can take at each setting based on an optional SD card from 32MB to 512MB.
Digital Camera >> Possible recording time/sec (Video clip) Image size 32MB 64MB SD card 128MB 256MB 512MB (Fine) 01:45 03:34 07:13 14:23 28:59 (Standard) 02:36 05:20 10:46 21:28 43:13 Quality 320 x 240 * The data shows the standard testing results. The actual capacity varies according to the shooting conditions and settings. The memory card testing results for 512MB are based on Toshiba, Panasonic and Sandisk SD card.
[ ] Auto Photography Mode Auto photography is a typical method of photography. Photographs can be taken simply because the exposure (the combination of shutter speed and aperture setting) is controlled automatically to suit the photographic conditions. You can use both a viewfinder and a 2.0" LCD monitor to compose the images. Taking photographs using the viewfinder will conserve the battery power. If the battery power is low, it is recommended that you only compose images using the viewfinder.
Digital Camera >> 4. Press the shutter button. Pressing the shutter button down halfway automatically focuses and adjusts the exposure, and pressing the shutter button down fully takes the photographs. The focus area frame turns blue and the viewfinder LED lights green when the camera is in focus and the exposure is calculated. When the focus or exposure is not suitable, the frame of the focus area turns yellow and the viewfinder LED flashes red.
Make sure that the battery is inserted before taking photographs. 1. Press the POWER button to turn the power on. 2. Set the mode dial to [ ]. By default, the LCD monitor setting is on. 3. Compose your image in the LCD monitor. 4. Press the shutter button down halfway, then press it down fully. User’s Manual >> Using the LCD Monitor Using the Optical Zoom Zoom photography allows you to take zoom photographs up to 3 times the size or wide-angle photography depending on the distance up to the subject.
Digital Camera >> Using the Digital Zoom Using a combination of 3 times optical zoom and 4.4 times digital zoom permits zoom photography of up to 13.2 times to suit the subject and the distance. The digital zoom is a compelling feature, the more an image is enlarged (zoomed), the more pixilated (grainer) the image will appear. 1. Set the mode dial to one of the photography modes. 2. Turn on the LCD monitor by pressing the button. 3. To enable the digital zoom: a. Press the MENU button. b.
Set the flash for taking photographs. The flash firing mode can be set to suit for the photographic conditions. 1. Set the mode dial to one of the photography modes. The flash setting is limited depending on the selected photography mode, scene mode, and capture mode. 2. Toggle the flash mode. User’s Manual >> Setting the Flash button to select the desired Each press of the button moves the icon one step through the sequence and displays it on the screen.
Digital Camera >> The table below will help you choose the appropriate flash mode: Flash mode Description [ Blank] Auto The flash fires automatically to suit the photographic conditions. This is only effective when the camera is set to the ] mode. [ [ ] Use this mode to reduce the red-eye phenomenon Red-eye Reduction when you want to take natural-looking photographs of people and animals in low-light conditions.
Photographs can be taken with the distance to the subject set by auto focus, [ ] macro, [ ] infinity, [ 3M ] fixed at 3 m, or [ 1M ] fixed at 1 m. The settings will be maintained even when the power is turned off or when Auto Power Off is activated. The focus settings will be limited depending on the selected photography. User’s Manual >> Setting the Focus 1. Set the mode dial to one of the photography modes. 2. Toggle the button to select the desired focus mode.
Digital Camera >> The table below will help you choose the appropriate focus mode: Focus mode Description [ Blank] Select this when you want to leave the settings up to Auto Focus the camera so that you can take photographs without paying attention to settings. Approximately 80 cm (both Wide and Tele) [ ] Select this when you want to take a close up Macro photography.
This setting allows photographs to be taken with the self-timer and allows interval photography. 1. Set the mode dial to one of the photography modes. 2. Toggle the button to select the User’s Manual >> Self-timer/Photographing at Intervals setting. Each press of the button moves the icon one step through the sequence and displays it on the screen. OFF [ [ Intv ] Interval For the [ OFF 10S ] 10 sec. [ [ 2S ] 2 sec. 10+2 ] 10+2 sec. ] mode and capture mode ([Continuous] and [Auto Exp.
Digital Camera >> The table below will help you choose the appropriate self-timer mode: Self-timer mode Description [ 10S ]10 sec. The picture is taken about 10 seconds after the shutter button is pressed. [ 2S ] 2 sec. The picture is taken about 2 seconds after the shutter button is pressed. [ 10+2 ]10+2 sec. One picture is taken about 10 seconds after the shutter button is pressed, then the camera prepares for another photograph (charging the flash).
Photographs can be taken with the overall screen intentionally made brighter or darker. These settings are used when a suitable brightness (exposure) cannot otherwise be obtained in circumstance where the difference in brightness between the subject and the background (the contrast) is large, or when the subject that you want to photograph is very small within the screen. Exposure can be set in 0.3 EV units. User’s Manual >> Exposure Compensation/Backlight Correction 1.
Digital Camera >> Effective Subjects and Set Values * * * * + (positive) compensation Printed matter comprising black text on whitish paper Backlighting Bright scenes or strong reflected light such as ski slopes When the sky accounts for a large area on the screen * * * - (negative) compensation People illuminated by a spotlight, in particular, against dark background Printed matter comprising white text on blackish paper Weak reflecting bodies such as evergreen trees or darkish leaves * * Backlight c
In this mode, photographs are taken with the priority given to shutter speed. The aperture is automatically set according to the shutter speed. If you set a fast shutter speed, you can take photographs of moving subjects that look as if they are still. If you set a slow shutter speed, you can take photographs that give the impression that the subject is in motion. User’s Manual >> [ Tv ] Shutter Speed Priority Photography Mode 1. Set the mode dial to [ Tv ] and press the button. 2.
Digital Camera >> The shutter speed and corresponding aperture value are displayed on the screen. If an appropriate combination cannot be set, the aperture value is displayed in red, but photographs can be taken. 3. Compose the picture, press the shutter button down halfway, then press it down fully. Setting the shutter speed slower than 0.5 second will result in long exposure photography and the [ ] will be displayed on the screen.
In this mode, photographs are taken with the priority given to aperture. The shutter speed is automatically set according to the aperture. If you set a small aperture (higher F value), you can take portrait photographs with an out-of-focus background. Alternatively, if you set a large aperture (lower F value), both close objects and distant objects will be in focus, for example when taking landscape photographs. User’s Manual >> [ Av ] Aperture Priority Photography Mode 1.
Digital Camera >> [ M ] Manual Photography Mode In this mode, photographs are taken by setting the aperture value and the shutter speed individually. 1. Set the mode dial to [ M ]. 2. Select the shutter speed or the aperture with the button. 3. Set the shutter speed or the aperture value with the search dial. 4. Compose the picture, press the shutter button down halfway, then press it down fully. In the flash photography mode, when [ ] and [ ] are set, the fastest shutter speed is 1/250 second.
This sets the scene setting such as [ scene and takes the photograph. ] portrait, [ ] sports or [ ] night 1. Set the mode dial to one of the scene modes. When the camera mode is set to the [ ] or [ ], [ ] cannot be selected. 2. Compose the picture, press the shutter button down halfway, then press it down fully.
Digital Camera >> [ ] Movie Mode This mode is for recording video clips. Voice can also be recorded. 1. Set the mode dial to [ ]. 2. Compose the picture with the zoom button. Optical zoom and digital zoom can be set while composing. 3. Fully press the shutter button. The recording of the video clip will start. Pressing the shutter button one more time will end the recording of the video clip, and record the image on the SD card.
] PLAYBACK MODE Playing Back Still Images You can play back the still images on an LCD monitor. Insert the SD card into the camera and turn on the power before starting. User’s Manual >> [ 1. Set the mode dial to [ ]. The last image appears on the screen. 2. Turn the search dial to move forward or reverse. Turn to the side: go back to the previous frame. Turn to the side: advance to the next frame. The images can also be fed in reverse or fed forward by pressing the / buttons.
Digital Camera >> Image Display Information You can switch the state of the information display by pressing the button when playing back images. Each press of the button switches the information display state in the following order: Pressing the / buttons during image playback will result in a 90 degree rotated display. The button rotates the image clockwise and displays it, whereas the button rotates the image counterclockwise and displays it.
You can play back video clips recorded on the camera. You can also play back voice. 1. Set the mode dial to [ ]. The last image appears on the screen. 2. Select the desired video clip with the search dial. You can also select the desired video clip with the / buttons. 3. Press the SET button. A press of the / buttons during playback allows fast forward play / fast reverse play. To stop video playback: Press the button. This stops playback and returns to the start of the video clip.
Digital Camera >> Button Operations During playback Fast forward play Each press of the During pause During a Stop button moves the operation one step 2x-speed playback button in the sequence of 2 times fast forward play, 4 times fast forward play, and regular play. Reverse play Each press of the button moves the operation one step button in the sequence of 2 times fast reverse play, 4 times reverse play, and regular forward play.
You can also playback your images on a TV screen. Before connecting to any devices, make sure to select NTSC / PAL system to match the video output system of the video equipment you are going to connect to the camera, then turn all connected devices off. It is also recommended to use the AC power adapter while transferring the recorded images and video files. 1. Set the mode dial to [ User’s Manual >> Playing Back Still Images/Video Clips on a TV ]. 2.
Digital Camera >> Recording Voice Memos A maximum of 30 seconds of audio can be recorded like a memo for photographed still images. The voice memo can be recorded only once. 1. Set the mode dial to [ ]. The last image appears on the screen. 2. Select the image with the search dial. 3. Press the shutter button. [VOICE RECORDING] is displayed on the screen and recording starts. 4. To stop recording voice memo during recording, press the shutter button again.
This function allows you to view 9 thumbnail images on the LCD monitor at the same time, which can quickly search for the image that you want. ]. 1. Set the mode dial to [ The last image appears on the screen. button once. 2. Press the The images are displayed in the thumbnail display. Images that have been selected with the / / / buttons or the search dial will be indicated by a green frame. When there are ten or more images, scroll the screen with the / buttons or the search dial. 3.
Digital Camera >> Zoom Playback Images that are being play back can be enlarged and displayed in 2 levels of 2 times and 4 times enlargement. This mode also allows you to enlarge your image on the selected portion of the image to check for small details. 1. Set the mode dial to [ ]. 2. Press the / buttons to select the image you want to enlarge. You can also select the image you want to enlarge with the search dial or from the thumbnail display. / 3. Adjust the zoom ratio with the buttons.
The slideshow function enables you to playback your still images automatically in order one image at a time. ]. 1. Set the mode dial to [ 2. Press the MENU button. The playback menu is displayed. 3. Select [Slide Show] with the / buttons, and press the SET button. The slideshow starts. 4. To stop the slide show during playback, press the SET button. The image is displayed on screen when you press the SET button.
Digital Camera >> Protecting Images Set the data to read-only to prevent images from being erased by mistake. Protecting Images 1. Set the mode dial to [ ]. 2. Select the image that you want to protect with the search dial. 3. Press the MENU button. The playback menu is displayed. 4. Select [Protect] with the / buttons, and press the SET button. 5. Select [Single] or [All] with the buttons, and press the SET button. / 6. Select [Set] with the / buttons, and press the SET button.
To cancel protection for only one image, display the image that you want to remove the image protection. 1. Select [Protect] with the / buttons from the playback menu, and press the SET button. 2. Select [Single] or [All] with the / buttons, and press the SET button. 3. Select [Cancel Protect] with the / buttons, and press the SET button. The removal of image protection is executed and the camera returns to the play mode.
Digital Camera >> DPOF Settings DPOF is the abbreviation for Digital Print Order Format, which allows you to embed printing information on your memory card. You can select the images to be printed and how many prints to make with the DPOF menu in the camera and insert the memory card to the card compatible printer. When the printer starts printing, it will read the embedded information on the memory card and print the specified images. 1. Set the mode dial to [ ]. 2.
User’s Manual >> The date and time setting screen appears. 9. Select date to [ON] or [OFF] with the / buttons, and press the SET button. ON: The date of the photograph will also be printed. OFF: The date of the photograph will not be printed. 10. Select [Print Enable] with the / buttons, and press the SET button. 11. Select [Execute] with the / buttons, and press the SET button.
Digital Camera >> [ ] Erasing Images Erasing at Photography Mode (Quick Delete Function) Quick delete function enables you to erase the image during photography. The quick delete menu provides you to directly erase the last image without further settings. 1. Set the mode dial to one of the photography modes. 2. Press the button. The last image and quick delete menu appear on the screen. 3. Press the SET button to erase the image. To not erase, select [Cancel], and press the SET button.
User’s Manual >> 4. Select [Single] or [All] with the / buttons, and press the SET button. Single: Erases the selected image or the last image. All: Erases all of the images on the SD card except for the protected images. Select: Erases a number of selected images. 5. Select [Execute] with the / buttons, and press the SET button. To not erase, select [Cancel], and press the SET button.
Digital Camera >> MENU OPTIONS Photography Menu (Picture) This menu is for the basic settings to be used when taking pictures in the photography mode. The setting is not canceled even if the camera is turned off or the Auto Power Off function is activated. 1. Set the mode dial to one of the photography modes. 2. Press the MENU button. [Picture] of the photography menu is displayed. 3. Select the desired [Picture] option item with the / buttons, and press the SET button to enter its respective menu. 4.
This sets the quality (compression rate) at which the photograph is taken. Fine: Low compression rate Standard: Normal Economy: High compression rate TIFF: No compression rate (the highest image quality and the largest file sizes.) Economy setting cannot be set in the [ ] mode. User’s Manual >> Quality TIFF setting is selectable only when size setting is set to 2816x2112. Sharpness This sets the sharpness of the image that will be photographed.
Digital Camera >> Photography Menu (Function) 1. Set the mode dial to one of the photography modes. 2. Press the MENU button, and select the [Function] menu with the button. [Function] of the photography menu is displayed. 3. Select the desired [Function] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the photography menu, press the MENU button.
A voice memo can be recorded for 30 seconds immediately following a still single image photography. This feature is also available during playback mode. Refer to section in this manual titled "[ ] Auto Photography Mode" for further details. ON: Enable voice memo. OFF: Disable voice memo. User’s Manual >> Voice Memo When voice memo is set to on, the preview setting is also fixed to on. LCD Bright. Select a brightness level for the LCD monitor.
Digital Camera >> Date Print The date of recording can be printed directly on the still images. This function must be activated before the image is taken. ON: Imprints the date on the still images when taking pictures. OFF: Does not imprint the date on the still images when taking pictures. Interval/Count This automatically photographs at a fixed interval for the number of set cycles. It is effective when the [ Intv ] is set with the 1 Min.: Photographs at a 1-minute interval. 3 Min.
1. Set the mode dial to one of the photography modes. 2. Press the MENU button, and select the [AE/AWB] menu with the button. [AE/AWB] of the photography menu is displayed. 3. Select the desired [AE/AWB] option item with the / buttons, and press the SET button to enter its respective menu. 4. Select the desired setting with the / buttons, and press the SET button. 5. To exit from the photography menu, press the MENU button.
Digital Camera >> Metering This sets the metering method for calculating the exposure. Multi: The entire area of the screen is measured, and the exposure is calculated. Spot: A very small portion of the center of the screen is measured, and the exposure is calculated. ISO This sets the sensitivity for taking pictures. When the sensitivity is raised (and the ISO figure is increased), photography will become possible even in dark locations, but the more pixilated (grainer) the image will appear.
In the [ ] mode, set which settings are to be used for playback. The setting is not canceled even if the camera is turned off or the Auto Power Off function is activated. 1. Set the mode dial to [ ]. 2. Press the MENU button. The playback menu is displayed. 3. Select the desired option item with the / buttons, and press the SET button to enter its respective menu. / 4. Select the desired setting with the buttons, and press the SET button. 5. To exit from the playback menu, press the MENU button.
Digital Camera >> Setup Menu (Basic) Set your camera’s operating environment. The settings will be saved after the power has been turned off or Auto Power Off is activated. 1. Set the mode dial to [ ]. [Basic] of the set-up menu is displayed. 2. Select the desired [Basic] option item with the / buttons, and press the SET button to enter its respective menu. / 3. Select the desired setting with the buttons, and press the SET button. 4. To exit from the set-up menu, change the mode dial setting. Card Info.
This sets whether or not to mute the playback sound of the recorded voice memo and voice recorded with the video clip. ON: Does not mute the playback sound of the voice memo and voice recorded with the video clip. OFF: Mute the playback sound of the voice memo and voice recorded with the video clip. Beep User’s Manual >> Sound This sets the camera sound each time you press the camera button if this function is enabled. ON: Sounds the beep tone. OFF: Does not sound the beep tone.
Digital Camera >> Setup Menu (Custom) 1. Set the mode dial to [ ], and select the [Custom] menu with the button. [Custom] of the set-up menu is displayed. 2. Select the desired [Custom] option item with the / buttons, and press the SET button to enter its respective menu. 3. Select the desired setting with the / buttons, and press the SET button. 4. To exit from the set-up menu, change the mode dial setting. Date/Time This sets the date and the time.
~ This sets the language that is displayed on the LCD monitor. Refer to section in this manual titled “Choosing the Language” for further details. English: English Francais:French Deutsch: German ~ Spanish Espanol: Italiano: Italian : Chinese (Traditional) : Chinese (Simplified) User’s Manual >> Language Video Output This sets video output system of the video equipment that you are going to connect to the camera. NTSC: NTSC system. PAL: PAL system. System Info.
Digital Camera >> TRANSFERRING RECORDED IMAGES AND VIDEOS TO YOUR COMPUTER To transfer images/video clips from the camera to your computer, follow these steps: Step 1: Installing the USB driver (Windows 98 and Mac OS 8.
Windows 98 computers The USB driver on the CD-ROM is exclusively for Windows 98 computers. Installing the USB driver on computers running Windows 2000/ME/XP is not necessary. 1. Insert the CD-ROM that came with the camera into your CD-ROM drive. The welcome screen appears. 2. Click "Install USB Driver". Follow the onscreen instructions to complete the installation. After the USB driver has been installed, restart your computer. User’s Manual >> Step 1: Installing the USB Driver Macintosh OS 8.
Digital Camera >> 7. Double click on the DCIM folder to open it to find more folders. Your recorded images and video clips will be inside these folders. Copy & Paste or Drag-N-Drop image and video files to a folder on your computer. Mac users: Double-click the “untitled” or “unlabeled” disk drive icon on our desktop. iPhoto may automatically launch.
Presto! Mr. Photo is an ideal program for creating, sharing, and managing digital images and videos. In this new edition, users can add sound to their files for useful real-life effects. The straightforward, powerful photo enhancement functions can make your pictures come alive. You can also adjust the photo quality and convert the file format for other applications. Mr. Photo also provides fun photo templates, motion shows, slideshows, e-mail, html, and links to other applications.
Digital Camera >> Installing Presto! Image Folio Image Folio is a comprehensive multimedia image-processing program. It enables you to process photographs, graphics, and drawings captured from scanners, VCRs, a laser discs, digital cameras, video capture boxes and any other location that the computer can capture images from. You can create new images by using the Image Folio’s powerful tools.
User’s Manual >> CONNECTING THE CAMERA TO OTHER DEVICES E-81
Digital Camera >> CAMERA SPECIFICATIONS Item Image sensor Image resolution LCD monitor Viewfinder Image quality Recording medium Compression format Image file format Lens Focus range Auto-Focus Shutter speed Image capturing Digital zoom Metering system 82-E Description 1/1.8" CCD sensor Total number of pixels: 6.3 mega pixels Number of effective pixels: 5.95 mega pixels 2816x2112, 2272x1704, 1600x1200, 640x480
Program AE/Shutter speed priority/Aperture priority/ Manual/Portrait /Sports / Night scene Exposure compensation -2EV - +2EV (in 0.3EV increments) White balance Auto/Incandescent/Fluorescent 1/Fluorescent 2/ Day light/Cloudy/Manual Flash Auto/Red-eye reduction/Suppressed Flash/ Forced flash Flash effective range 0.6 m –3.0 m (Wide / ISO=200) ISO sensitivity Equivalent to ISO 50/100/200/Auto (ISO 50-ISO 200) Self-timer 10 sec./2 sec./10+2 sec.