User guide

Rev. DeC, 2013ronbow.comINSTALLATION GUIDe

INSTALLATION SHeeT

UNDER COUNTER SINKSMODEL: 420819

200513

200555

UNDERMOUNT OVAL VESSEL

MATERIALS NEEDED:

PHILLIPS SCREWDRIVER

ADHESIVE CAULKING

LEVELER

MATERIAL PROVIDED:

(4)UNDERMOUNT CLIPS

(4)SCREWS

(4)WASHERS

NOTE: DO NOT USE any adhesives with silicone. Silicone will bond to the decorative ﬁnish and cause permanent damage.

Check the Ronbow website for the sink cutout template.

Figure 1.

STEP 1:

Apply adhesive caulking around the top side

of rim near the edge. Carefully place, align, and press

ﬁrmly.

See Figure 1.

Figure 2.

STEP 2:

Locate the 4 metal inserts under the

countertop. Attach 4 undermount clips to secure

vessel.

See Figure 2.

Figure 3.

STEP 3:

Secure top, and then backsplash to cabinet

by using adhesive caulking.

See Figure 3.

Adhesive Caulking

Backsplash

Countertop

Undermount

Clip

Backsplash

To p

Cabinet

Adhesive

Caulking

PAGE 1
UNDERMOUNT OVAL VESSEL MODEL: 420819 200513 200555 UNDER COUNTER SINKS INSTALLATION SHEET MATERIALS NEEDED: MATERIAL PROVIDED: PHILLIPS SCREWDRIVER ADHESIVE CAULKING LEVELER (4)UNDERMOUNT CLIPS (4)SCREWS (4)WASHERS Note: DO NOT USE any adhesives with silicone. Silicone will bond to the decorative finish and cause permanent damage. Check the Ronbow website for the sink cutout template. STEP 1: Apply adhesive caulking around the top side of rim near the edge. Carefully place, align, and press firmly.